Oukitel C23 Pro spare parts

Technical Characteristics of Oukitel C23 Pro Repuestos

Screen Replacement

Type: LCD Display

Resolution: 720 x 1520 pixels

Size: 6.52 inches

Touch Screen: Capacitive multi-touch

Battery Replacement

Capacity: 5000 mAh

Type: Li-Po non-removable

Voltage: 3.85V

Camera Module Replacement

Type: Triple camera setup

Main Camera: 13 MP

Secondary Camera: 2 MP (macro)

Tertiary Camera: 2 MP (depth)

Charging Port Replacement

Type: USB Type-C

Instructions for Replacing Oukitel C23 Pro Repuestos

Tools Required

• Plastic opening tools
• Suction cup
• Phillips screwdriver
• Tweezers
• Spudger
• Adhesive strips

Screen Replacement Instructions

• Power off the device.
• Remove the SIM and SD card tray.
• Use the suction cup to lift the screen slightly.
• Insert a plastic opening tool between the screen and the frame.
• Gently work your way around the device to separate the screen from the frame.
• Disconnect the display cables carefully using the spudger.
• Replace the old screen with the new one by reversing the steps.

Battery Replacement Instructions

• Power off the device.
• Remove the back cover by carefully prying it open.
• Disconnect the battery connector using the spudger.
• Remove any adhesive strips securing the battery.
• Lift the old battery out of the case using tweezers.
• Insert the new battery and reconnect the connector.
• Secure the battery with adhesive strips and replace the back cover.

Camera Module Replacement Instructions

• Power off the device.
• Remove the back cover.
• Disconnect the camera module connectors.
• Remove the screws securing the camera module.
• Lift and remove the old camera module.
• Insert the new camera module and secure it with screws.
• Reconnect the camera module connectors and replace the back cover.

Charging Port Replacement Instructions

• Power off the device.
• Remove the back cover.
• Locate and disconnect the charging port connector.
• Remove the screws securing the charging port.
• Carefully lift the charging port out using tweezers.
• Place the new charging port and secure it with screws.
• Reconnect the charging port connector and replace the back cover.

Please make sure to perform all replacements in a clean environment and handle all components with care to avoid damage.