Oukitel C8 spare parts

Technical Characteristics of Oukitel C8 Repuestos

Oukitel C8 repuestos (spare parts) are essential for maintaining the optimal functioning of your smartphone. The critical spare parts for the Oukitel C8 include:

• Screen: 5.5 inches, HD display with 1280 x 720 resolution.
• Battery: 3000mAh, Lithium-ion battery.
• Rear Camera: 13MP AF with LED flash.
• Front Camera: 5MP FF.
• Processor: MT6580A, Quad-core 1.3GHz.
• Memory: 2GB RAM, 16GB ROM (Supports microSD card up to 64GB).
• Operating System: Android 7.0 Nougat.

Instructions on How to Replace Oukitel C8 Repuestos

1. Tools Required

Before starting the replacement process, ensure you have the following tools:

• Phillips screwdriver
• Plastic pry tool
• Tweezers
• SIM ejector tool
• Adhesive strips
• Anti-static wrist strap (optional, but recommended)

2. Preliminary Steps

Perform these steps before replacing any component:

• Power off your Oukitel C8.
• Remove the SIM card tray using the SIM ejector tool.
• If replacing battery or screen, remove the back cover and battery carefully.

3. Replacing the Screen

Follow these steps to replace the Oukitel C8 screen:

• Remove any screws securing the screen to the frame using the Phillips screwdriver.
• Use the plastic pry tool to gently separate the screen from the housing. Start from one corner and work your way around the perimeter.
• Disconnect the screen flex cable from the motherboard using tweezers.
• Connect the new screen's flex cable to the motherboard and ensure it is securely attached.
• Align the new screen with the frame and press gently to secure it in place. Make sure the adhesive strips are properly placed to hold the screen firmly.
• Reinsert and tighten the screws to secure the screen with the frame.
• Replace the battery and back cover, then power on the device to test the new screen.

4. Replacing the Battery

Follow these steps to replace the Oukitel C8 battery:

• Remove any screws securing the battery connector shield using the Phillips screwdriver.
• Use the tweezers to carefully lift the battery connector from the motherboard.
• Use a plastic pry tool to gently lift the battery out of the housing. Be cautious not to bend or puncture the battery.
• Insert the new battery into the housing and press it gently to secure it in place.
• Reconnect the battery connector to the motherboard and ensure it is firmly attached.
• Replace and tighten any screws to secure the battery connector shield.
• Replace the back cover and power on the device to ensure the new battery is functioning correctly.

5. Replacing the Rear Camera

Follow these steps to replace the Oukitel C8 rear camera:

• Remove any screws securing the rear camera module using the Phillips screwdriver.
• Disconnect the rear camera flex cable from the motherboard using tweezers.
• Carefully remove the old rear camera module from the housing.
• Place the new rear camera module into the housing and ensure it fits properly.
• Reconnect the rear camera flex cable to the motherboard and ensure it is securely attached.
• Replace and tighten any screws to secure the rear camera module.
• Replace the battery (if removed) and back cover, then power on the device to test the new camera.

6. Final Steps

After replacing any component, always:

• Check for any leftover screws or parts and ensure everything is properly assembled.
• Power on the device to verify that all replaced components are functioning correctly.

By following these detailed steps, you can successfully replace various Oukitel C8 spare parts and keep your smartphone in optimal condition.