Oukitel IIIF150 Raptor spare parts

Technical Characteristics of Oukitel IIIF150 Raptor Repuestos

The Oukitel IIIF150 Raptor is a rugged smartphone known for its durability and robust features. It includes various repuestos (replacement parts) to ensure its longevity and functionality. Here are the technical specifications of the key components:

Battery

• Capacity: 8500mAh
• Type: Li-Po non-removable battery
• Standby Time: Up to 600 hours
• Talk Time: Up to 40 hours

Display

• Size: 6.3 inches
• Resolution: 1080 x 2340 pixels
• Protection: Corning Gorilla Glass

Camera

• Main Camera: Triple 48MP + 2MP + 2MP
• Selfie Camera: 8MP

Memory

• RAM: 6GB
• Internal Storage: 128GB
• Expandable Storage: microSDXC, up to 256GB

Instructions for Replacing Oukitel IIIF150 Raptor Repuestos

Replacing components in the Oukitel IIIF150 Raptor requires precision and care. Below are the detailed steps for replacing key parts of the phone:

Battery Replacement

• Step 1: Power off the device and remove any SIM or SD cards.
• Step 2: Use a plastic pry tool to carefully remove the back cover.
• Step 3: Disconnect the battery connector from the motherboard.
• Step 4: Gently lift the battery out of the compartment using a plastic tool.
• Step 5: Insert the new battery and reconnect it to the motherboard.
• Step 6: Replace the back cover and press firmly until it clicks into place.
• Step 7: Power on the device to ensure the battery is functioning correctly.

Display Replacement

• Step 1: Power off the device and remove any SIM or SD cards.
• Step 2: Use a heat gun to warm the edges of the screen to soften the adhesive.
• Step 3: Insert a plastic pry tool between the screen and the frame and carefully pry around the edges.
• Step 4: Disconnect the display connector from the motherboard.
• Step 5: Remove the old display and clean off any adhesive residue.
• Step 6: Apply new adhesive to the frame and carefully place the new display in position.
• Step 7: Reconnect the display connector and ensure it is firmly attached.
• Step 8: Gently press the new display into place and allow the adhesive to set.
• Step 9: Power on the device to test the new display.

Camera Replacement

• Step 1: Power off the device and remove any SIM or SD cards.
• Step 2: Remove the back cover using a plastic pry tool.
• Step 3: Locate and disconnect the camera module from the motherboard.
• Step 4: Carefully remove the camera module from its housing.
• Step 5: Insert the new camera module and reconnect it to the motherboard.
• Step 6: Replace the back cover and press firmly until it clicks into place.
• Step 7: Power on the device and test the camera functionality.

Memory Replacement

• Step 1: Power off the device and remove any SIM or SD cards.
• Step 2: Use a plastic pry tool to remove the back cover.
• Step 3: Locate the memory slots and gently remove the existing memory card.
• Step 4: Insert the new memory card into the slot, ensuring it is properly seated.
• Step 5: Replace the back cover and press firmly until it clicks into place.
• Step 6: Power on the device to ensure the new memory is recognized and functioning correctly.

By following these detailed instructions, you can replace key components in the Oukitel IIIF150 Raptor safely and effectively.