Oukitel K10 spare parts

Oukitel K10 Technical Characteristics and Replacement Instructions

Technical Characteristics of Oukitel K10 Repuestos

The Oukitel K10 is a robust smartphone known for its large battery capacity and durable design. Below are the technical characteristics of its components (repuestos):

• Display: 6.0 inches, 1080 x 2160 pixels
• Battery: 11,000 mAh
• Rear Camera: Dual 21 MP + 8 MP
• Front Camera: 13 MP
• Platform: Android 7.1 (Nougat)
• Chipset: MediaTek MT6763 (Helio P23)
• CPU: Octa-core 2.0 GHz Cortex-A53
• RAM: 6 GB
• Storage: 64 GB, expandable via microSD

Instructions for Replacing Oukitel K10 Repuestos

Replacing components of the Oukitel K10 requires careful attention to detail and patience. Below are the step-by-step instructions for replacing common parts:

Replacing the Battery

• Step 1: Power off the phone and remove the SIM card tray.
• Step 2: Use a heat gun or hairdryer to gently warm the edges of the back cover to soften the adhesive.
• Step 3: Insert a plastic prying tool into the seam between the back cover and the phone frame. Carefully work your way around the edges to lift the back cover.
• Step 4: Once the cover is removed, locate and disconnect the battery connector from the motherboard.
• Step 5: Peel off the adhesive strips securing the battery and carefully lift out the battery. Avoid puncturing or bending the battery.
• Step 6: Place the new battery into the compartment and reattach the adhesive strips.
• Step 7: Reconnect the battery connector to the motherboard.
• Step 8: Reapply adhesive to the back cover and press it firmly onto the phone frame.
• Step 9: Reinsert the SIM card tray and power on the phone to test the new battery.

Replacing the Display

• Step 1: Power off the phone and remove the SIM card tray.
• Step 2: Using a heat gun or hairdryer, gently warm the edges of the screen to loosen the adhesive.
• Step 3: Insert a plastic prying tool between the display and the phone frame. Carefully slide the tool around the edges to lift the display.
• Step 4: Once the display is lifted, disconnect the display cable from the motherboard.
• Step 5: Remove any remaining adhesive from the frame to prepare for the new display.
• Step 6: Connect the new display to the motherboard and gently place it into the frame.
• Step 7: Press the edges of the display firmly to secure it with the adhesive.
• Step 8: Power on the phone to ensure the new display is functioning correctly.
• Step 9: Reinsert the SIM card tray.

Following these step-by-step instructions should help you successfully replace common components on your Oukitel K10. If you encounter any issues, consider consulting a professional mobile phone repair technician.