Oukitel K1000 Max spare parts

Technical Characteristics of Oukitel K1000 Max Repuestos

The Oukitel K1000 Max is a rugged smartphone known for its durability and long battery life. When it comes to repuestos (replacement parts), it's essential to understand the main components that might need replacement during the phone's lifespan. Below are the key repuestos available for the Oukitel K1000 Max:

Battery

• Capacity: 10000 mAh
• Type: Lithium-Polymer
• Voltage: 3.85V

Display

• Screen Size: 5.5 inches
• Resolution: 1920 x 1080 pixels
• Type: IPS LCD capacitive touchscreen

Camera Module

• Main Camera: 16 MP
• Front Camera: 8 MP
• Features: LED flash, HDR, panorama

Charging Port

• Type: Micro USB
• Features: Waterproof cover included

Other Components

• Speaker: Integrated mono speaker
• Microphone: Noise-canceling microphone
• Buttons: Volume and Power buttons
• SIM Tray: Dual SIM slot

Instructions for Replacing Oukitel K1000 Max Repuestos

Replacing parts of the Oukitel K1000 Max is a task that should be approached with caution. Below are the detailed instructions on how to replace these main components:

Step 1: Preparing for Replacement

• Power off the device and disconnect it from any power source.
• Remove the SIM card tray using the provided ejection tool.
• Gather all necessary tools, including a small Phillips screwdriver, plastic prying tools, and tweezers.

Step 2: Removing the Back Cover

• Unscrew all visible screws on the back cover of the phone.
• Use a plastic prying tool to carefully separate the back cover from the phone body. Be gentle to avoid damaging the clips holding the cover in place.
• Set the back cover and screws aside safely.

Step 3: Disconnecting the Battery

• Locate the battery connector on the motherboard.
• Use a plastic prying tool to disconnect the battery connector gently.
• If replacing the battery, carefully lift and remove it from the adhesive holding it in place.

Step 4: Replacing the Display

• Disconnect the display connector from the motherboard.
• Use a heat gun or hair dryer to soften the adhesive around the edges of the display.
• Carefully use prying tools to lift the display from the frame of the device.
• Clean off any remaining adhesive and apply new adhesive strips.
• Position the new display and connect it to the motherboard.

Step 5: Replacing the Camera Module

• Locate the camera module on the motherboard and disconnect its connector.
• Remove any screws or adhesive holding the camera module in place.
• Carefully remove the old camera module and replace it with the new one.
• Secure the new camera module and reconnect its connector.

Step 6: Reassembling the Phone

• Reconnect the battery connector to the motherboard.
• Position the back cover onto the device and press it firmly to engage the clips.
• Replace and tighten all screws to secure the back cover.
• Reinsert the SIM card tray.

Once the phone is reassembled, power it on to ensure that all replaced components are functioning correctly. If any issues arise, recheck all connections and ensure that the components are properly seated.