Oukitel K10000 Max spare parts

Oukitel K10000 Max Technical Characteristics

The Oukitel K10000 Max is a rugged smartphone known for its durability and long battery life. Below are the technical characteristics of the device:

• Battery: 10000 mAh Li-Po, non-removable
• Display: 5.5 inches, 1080 x 1920 pixels, IPS LCD
• Processor: MediaTek MT6753, Octa-core 1.3 GHz Cortex-A53
• Memory: 3GB RAM, 32GB internal storage, expandable via microSD
• Camera: Rear - 16 MP, Front - 8 MP
• Operating System: Android 7.0 (Nougat)
• Water Resistance: IP68 certified

Instructions for Replacing Oukitel K10000 Max Parts

1. Battery Replacement

Given the non-removable nature of the battery, it is recommended to have the replacement done by a professional. However, if you choose to do it yourself, follow these steps:

• Power off the device and remove the SIM card tray.
• Using a Torx screwdriver, remove all screws from the back panel.
• Carefully pry open the back cover using a plastic opening tool.
• Disconnect the battery connector from the motherboard.
• Carefully detach the battery from the phone. Note that adhesive may be holding it in place.
• Replace with the new battery and reconnect the battery connector.
• Reattach the back cover and secure it with the screws.
• Reinsert the SIM card tray and power on the device to test the new battery.

2. Display Replacement

The display replacement requires precision and patience. Follow the steps below for successful replacement:

• Turn off the phone and remove the SIM card tray.
• Remove the screws securing the back panel with a Torx screwdriver.
• Gently pry open the back cover using a plastic opening tool.
• Disconnect the battery connector to avoid any short circuits.
• Disconnect the display connector from the motherboard.
• Carefully heat the edges of the screen to soften the adhesive.
• Use a suction cup and plastic opening tool to lift and remove the damaged display.
• Align the new display and connect the display connector to the motherboard.
• Reconnect the battery connector and reattach the back panel with screws.
• Power on the device to ensure the new display is working correctly.

3. Camera Replacement (Rear & Front)

Replacing the camera modules is relatively straightforward. Follow these steps:

• Power off the device and remove the SIM card tray.
• Remove the screws securing the back panel with a Torx screwdriver.
• Carefully pry open the back cover using a plastic opening tool.
• Disconnect the battery connector from the motherboard.
• Locate the camera module that needs replacement.
• Gently disconnect the camera connector from the motherboard.
• Remove the faulty camera module and replace it with a new one.
• Connect the new camera module to the motherboard.
• Reconnect the battery connector and reattach the back cover with screws.
• Power on the device to test the new camera module.