Oukitel K12 spare parts

Technical Characteristics of Oukitel K12 Repuestos

The Oukitel K12 is equipped with several technical components that ensure its performance and durability. Below are the key technical characteristics of its repuestos (replacement parts):

• Battery: 10000mAh Li-Po non-removable battery
• Screen: 6.3 inch IPS LCD, 1080 x 2340 pixels
• Processor: MediaTek Helio P35 (MT6765) Octa-core
• RAM: 6GB
• Internal Storage: 64GB, expandable via microSD
• Camera Rear: 16MP + 2MP; Front: 8MP
• Operating System: Android 9.0 Pie
• SIM: Dual SIM (Nano-SIM, dual stand-by)
• Charging Port: USB Type-C with Fast Charging

Instructions on How to Replace Oukitel K12 Repuestos

Below are the detailed instructions to replace various repuestos (replacement parts) for the Oukitel K12:

1. Replacing the Battery

• Step 1: Power off the device and remove any SIM/memory cards.
• Step 2: Use a proper suction cup tool to remove the back cover carefully.
• Step 3: Disconnect the battery connector gently from the motherboard.
• Step 4: Remove the old battery by using a plastic spudger tool to avoid puncturing. Note: The battery might have adhesive strips; make sure to remove them carefully.
• Step 5: Place the new battery in the exact position and connect it to the motherboard.
• Step 6: Secure the back cover using adhesive or clips.
• Step 7: Power on the device to ensure the new battery is working properly.

2. Replacing the Screen

• Step 1: Power off the device and remove any SIM/memory cards.
• Step 2: Use a heat gun to soften the adhesive around the screen edges.
• Step 3: Carefully use a suction cup and a plastic opening tool to separate the screen assembly from the chassis.
• Step 4: Disconnect the screen's ribbon cable from the motherboard.
• Step 5: Replace the old screen with the new screen and connect the ribbon cable back to the motherboard.
• Step 6: Carefully reapply the screen onto the chassis ensuring the adhesive reattaches securely.
• Step 7: Power on the device to check the new screen's functionality.

3. Replacing the Charging Port

• Step 1: Power off the device and remove any SIM/memory cards.
• Step 2: Use a proper suction cup tool to remove the back cover carefully.
• Step 3: Locate the charging port on the motherboard and use a screwdriver to remove any securing screws.
• Step 4: Carefully disconnect the charging port ribbon cable from the motherboard.
• Step 5: Replace the old charging port with the new one and reconnect the ribbon cable to the motherboard.
• Step 6: Secure the new charging port with screws.
• Step 7: Reattach the back cover using adhesive or clips.
• Step 8: Power on the device to ensure the new charging port is functioning properly.