Oukitel K15 Plus spare parts

Oukitel K15 Plus Technical Characteristics

The Oukitel K15 Plus comes with impressive specifications that cater to a variety of user needs. Below are its key technical characteristics:

• Display: 6.52 inches, 720 x 1600 pixels
• Processor: MediaTek Helio A25
• RAM: 3GB
• Internal Storage: 32GB, expandable via microSD
• Battery: 10,000 mAh Li-Po, non-removable
• Camera: Triple: 13 MP (wide) + 2 MP (macro) + 2 MP (depth)
• Operating System: Android 10
• Connectivity: Wi-Fi 802.11 a/b/g/n, Bluetooth 5.0, GPS, USB Type-C

Instructions to Replace Oukitel K15 Plus Repuestos

Replacing parts (repuestos) in your Oukitel K15 Plus requires careful handling. Follow these detailed instructions for safe and successful replacement:

Required Tools

• Phillips-head screwdriver
• Plastic opening tools
• Suction cup
• Tweezers
• Spudger
• Adhesive tape

Steps to Replace the Battery

• Power off your phone and remove any SIM or microSD card from the slots.
• Use a suction cup to create a gap between the rear cover and the phone body. Insert a plastic opening tool into the gap and carefully pry around the edges to release the rear cover.
• Once the rear cover is removed, locate the battery connector. Use a Phillips-head screwdriver to remove the screws securing the battery connector shield.
• Disconnect the battery connector using a spudger to lift it from the motherboard.
• Gently pry up the battery using a plastic tool, taking care not to puncture or bend it. The battery is usually secured with adhesive, so work slowly to avoid damage.
• Once the old battery is removed, place the new battery in the compartment and press it down to secure it with the adhesive.
• Reconnect the battery connector and secure the connector shield with screws.
• Reattach the rear cover by aligning it with the edges of the phone and pressing firmly until it snaps back into place.
• Power on the phone to ensure the new battery is working correctly.

Steps to Replace the Screen

• Begin by powering off your phone and removing any SIM or microSD card from the slots.
• Use a suction cup to lift the front screen slightly, then insert a plastic opening tool around the edges to carefully pry off the screen assembly.
• Disconnect the ribbon cables connecting the screen to the motherboard. Carefully lift and separate the screen from the phone body.
• Attach the new screen's ribbon cables to the motherboard in the correct order.
• Align the new screen with the phone body and press it down gently to ensure it fits securely without gaps.
• Power on the phone to confirm the new screen is functioning properly.

Follow these steps carefully to replace the respective parts in your Oukitel K15 Plus safely and efficiently. If you encounter any difficulties, it is advisable to seek professional assistance.