Oukitel K4000 Pro spare parts

Technical Characteristics of Oukitel K4000 Pro Repuestos

The Oukitel K4000 Pro is known for its robust design and long battery life. Below are the key technical characteristics of the replacement parts (repuestos) commonly needed:

Screen

• Size: 5.0 inches
• Type: HD 720x1280 pixels, IPS LCD
• Glass: Corning Gorilla Glass

Battery

• Capacity: 4600 mAh
• Type: Lithium-Polymer

Rear Camera

• Resolution: 8 MP (interpolated to 13 MP)
• Features: Autofocus, LED flash

Front Camera

• Resolution: 2 MP (interpolated to 5 MP)

Charging Port

• Type: Micro USB

Other Repuestos

• Motherboard: MTK6735P, Quad-core 1.0 GHz
• RAM: 2 GB
• Storage: 16 GB (Expandable via MicroSD)

Instructions for Replacing Oukitel K4000 Pro Repuestos

Tools Required

• Phillips Head Screwdriver
• Plastic Pry Tool
• Tweezers
• Suction Cup
• Adhesive Tape (for screen)

Step-by-Step Instructions

1. Power Off the Device

Before starting any repair, make sure to power off the Oukitel K4000 Pro to avoid any electrical damage.

2. Remove the Back Cover

Use a plastic pry tool to carefully lift and remove the back cover. Start from one corner and slowly work your way around.

3. Remove the Battery

Remove the battery by gently lifting it from the bottom. Be careful not to puncture or damage the battery.

4. Unscrew the Protective Plate

Using a Phillips head screwdriver, remove the screws securing the protective plate over the internal components. Keep the screws safely for reassembly.

5. Disconnect the Cables

Use tweezers or a plastic pry tool to disconnect the battery cable, display cable, and any other flex cables connected to the motherboard.

6. Remove the Damaged Component

If replacing the screen, use a suction cup to lift the screen after applying heat to soften the adhesive. If replacing other components, gently remove them using appropriate tools.

7. Install the New Component

Align and connect the new replacement component. Ensure all flex cables are correctly connected and the component is securely fitted.

8. Reassemble the Device

Follow the disassembly steps in reverse. Reattach the protective plate using the screws, reconnect all cables, and place the battery back in its position.

9. Replace the Back Cover

Snap the back cover back onto the phone, ensuring all clips are securely fastened.

10. Power On the Device

Turn on the Oukitel K4000 Pro to ensure the new component is working correctly. Perform a thorough check to verify functionality.

Congratulations! You have successfully replaced the necessary repuestos on the Oukitel K4000 Pro.