Oukitel K5000 spare parts

Technical Characteristics of Oukitel K5000 Repuestos

Oukitel K5000 repuestos, commonly referred to as replacement parts, are designed to restore the functionality and aesthetics of the Oukitel K5000 smartphone. These parts include replacement screens, batteries, charging ports, and other internal components. Below are the detailed characteristics of some common Oukitel K5000 repuestos:

1. Replacement Screen

• Size: 5.7 inches
• Resolution: 720 x 1440 pixels
• Type: IPS LCD capacitive touchscreen
• Protection: Corning Gorilla Glass

2. Replacement Battery

• Capacity: 5000 mAh
• Type: Non-removable Li-Po
• Voltage: 3.85V

3. Charging Port

• Type: Micro USB 2.0
• Compatibility: Oukitel K5000

Instructions to Replace Oukitel K5000 Repuestos

Step-by-Step Guide to Replace the Screen

• Power off your Oukitel K5000 and remove the back cover.
• Unscrew all the screws securing the internal frame.
• Gently disconnect the battery connector to avoid any short circuits.
• Use a plastic pry tool to carefully detach the old screen's adhesive from the frame.
• Disconnect the screen's ribbon cable from the motherboard.
• Remove the old screen and place the new screen in position.
• Reconnect the screen's ribbon cable to the motherboard.
• Carefully align the new screen and press firmly to secure the adhesive.
• Reconnect the battery and screw the internal frame back in place.
• Replace the back cover and power on the device to test the new screen.

Step-by-Step Guide to Replace the Battery

• Power off your Oukitel K5000 and remove the back cover.
• Unscrew all the screws securing the protective frame over the battery.
• Gently disconnect the battery connector from the motherboard.
• Use a plastic pry tool to carefully lift the battery from the adhesive.
• Remove the old battery and place the new battery in the compartment.
• Reconnect the battery connector to the motherboard.
• Secure the protective frame back with screws.
• Replace the back cover and power on the device to ensure the new battery works properly.

Step-by-Step Guide to Replace the Charging Port

• Power off your Oukitel K5000 and remove the back cover.
• Unscrew and remove the protective frame to access internal components.
• Disconnect the battery connector from the motherboard.
• Locate the charging port and disconnect it from the motherboard.
• Use a soldering iron to carefully remove the old charging port from its position.
• Place the new charging port in the correct position and solder it in place.
• Reconnect the charging port to the motherboard.
• Reconnect the battery connector and secure the internal frame back with screws.
• Replace the back cover and power on the device to test the new charging port.

By following these detailed instructions, you can efficiently replace different Oukitel K5000 spare parts and ensure your device is functioning properly.