Oukitel K6000 spare parts

Technical Characteristics of Oukitel K6000 Repuestos

The Oukitel K6000 is a rugged smartphone known for its longevity and durability. When it comes to replacements (repuestos), it is important to use compatible parts to ensure the device functions correctly. Below are the technical characteristics of the main components available for the Oukitel K6000:

Screen

• Size: 5.5 inches
• Resolution: 720 x 1280 pixels (HD)
• Type: IPS LCD capacitive touchscreen
• Protection: Corning Gorilla Glass

Battery

• Capacity: 6000 mAh
• Type: Non-removable Li-Po
• Standby Time: Up to 360 hours
• Talk Time: Up to 10 hours

Camera

• Primary: 13 MP, autofocus, LED flash
• Secondary: 5 MP

Instructions on How to Replace Oukitel K6000 Repuestos

Tools Needed

• Phillips screwdriver
• Plastic opening tools
• Metal spudger
• Tweezers
• Adhesive strips
• Heat gun

Step-by-Step Instructions

Replacing the Screen

• Turn off the device and remove the SIM card tray.
• Use a heat gun to gently heat the edges of the screen to soften the adhesive.
• Carefully insert a plastic opening tool between the screen and the frame to start separating them. Work your way around the edges.
• Once the screen is loosened, gently lift it off but do not pull it away completely as it is still connected by a ribbon cable.
• Disconnect the ribbon cable by lifting the latch on the connector and pulling the cable out.
• Replace the old screen with a new one by connecting the ribbon cable and securing the latch.
• Carefully align and press the new screen into place. Ensure all edges are properly sealed.
• Turn the device back on and test the new screen to ensure it functions properly.

Replacing the Battery

• Turn off the device and remove the back cover using a plastic opening tool.
• Remove any screws securing the battery to the frame using a Phillips screwdriver.
• Use a plastic opening tool to gently pry up the battery. Be cautious of the adhesive strips securing it to the frame.
• Disconnect the battery connector from the motherboard by using tweezers to lift the connection point.
• Dispose of the old battery safely.
• Place the new battery into the frame, ensuring it is aligned correctly.
• Reconnect the battery connector to the motherboard.
• Secure the new battery with screws and reattach the back cover.
• Turn the device on to ensure the battery replacement was successful.