Oukitel K7 Pro repuestos

Technical Characteristics of Oukitel K7 Pro Repuestos

Display

Type: IPS LCD
Size: 6.0 inches
Resolution: 1080 x 2160 pixels
Protection: Corning Gorilla Glass

Battery

Type: Li-Po
Capacity: 10,000 mAh
Charging: Fast charging 9V/2A (18W)
Stand-by: Up to 50 days

Camera

Primary: Dual 13 MP + 2 MP
Secondary (Selfie): 5 MP
Features: Dual-LED flash, HDR, panorama
Video: 1080p@30fps

Platform

OS: Android 9.0 (Pie)
Chipset: MediaTek MT6763T Helio P23 (16nm)
CPU: Octa-core (4x2.3 GHz Cortex-A53 & 4x1.65 GHz Cortex-A53)
GPU: Mali-G71 MP2

Memory

Internal: 64GB, 4GB RAM
Expandable: Yes, microSD up to 256GB

Instructions to Replace Oukitel K7 Pro Repuestos

Step 1: Preparation

• Turn off the device completely.
• Gather all necessary tools: a precision screwdriver set, plastic pry tools, suction cup, tweezers, and replacement parts.

Step 2: Remove Back Cover and Battery

• Use the suction cup to lift the back cover gently.
• Insert a plastic pry tool into the seam and carefully work your way around to detach the back cover.
• Unscrew all visible screws holding the battery using a precision screwdriver.
• Gently disconnect the battery connector using a plastic tool.
• Remove the battery from its compartment.

Step 3: Remove the Motherboard

• Unscrew the protective plates covering the motherboard and remove them.
• Disconnect all ribbon cables attached to the motherboard (display, camera, fingerprint sensor, etc.).
• Gently pry the motherboard out using a plastic tool.

Step 4: Replace the Desired Components

• Identify the component you need to replace (e.g., display, camera, charging port).
• Carefully remove the old component by unscrewing and disconnecting it from the motherboard.
• Replace it with the new component, ensuring all connectors snap securely into place.

Step 5: Reassemble the Device

• Place the motherboard back into its original position.
• Reconnect all ribbon cables to the motherboard.
• Screw the protective plates back over the motherboard.
• Reconnect the battery connector and place the battery back into its compartment.

Step 6: Final Steps

• Screw back all the screws securing the battery and other components.
• Snap the back cover back onto the device, ensuring all clips are engaged.
• Turn on the device to ensure it is functioning correctly with the new components.

Please follow these steps carefully to avoid damaging the device. If unsure, seek professional help.