Oukitel K8 spare parts

Technical Characteristics of Oukitel K8 Repuestos

The Oukitel K8 comes with a range of replaceable parts (repuestos) that can be repaired or replaced to ensure the longevity of your device. Below are some of the key technical characteristics of the main replaceable components:

Battery

• Type: Li-Po 5000 mAh, non-removable
• Voltage: 3.8V
• Capacity: 5000 mAh

Display

• Type: IPS LCD capacitive touchscreen
• Size: 6.0 inches
• Resolution: 1080 x 2160 pixels

Camera

• Primary: 13 MP, PDAF
• Secondary: 5 MP
• Features: LED flash, panorama, HDR

Other Components

• Motherboard: ARM Cortex-A53, Octa-Core 1.5GHz
• RAM: 4GB
• Internal Storage: 64GB (expandable via microSD)

Instructions on How to Replace Oukitel K8 Repuestos

Replacing parts in your Oukitel K8 requires some technical skill and the proper tools. Follow these detailed instructions to safely replace your Oukitel K8 repuestos:

Tools Required

• Plastic pry tools
• Phillips #00 screwdriver
• Electrostatic discharge (ESD) strap
• Tweezers
• Suction cup
• Adhesive tape

Step-by-Step Instructions

1. Power Off the Device

Ensure your Oukitel K8 is powered off completely to avoid any electrical damage.

2. Remove the Back Cover

• Use a plastic pry tool to carefully work around the edges of the back cover.
• Gently lift and remove the back cover to expose the internal components.

3. Disconnect the Battery

• Remove any screws securing the battery connector using the Phillips #00 screwdriver.
• Use tweezers to gently disconnect the battery connector from the motherboard.

4. Remove the Battery

• Lift the battery out of its compartment carefully.
• Replace it with the new battery and reconnect the battery connector to the motherboard.

5. Replace Other Components

• For the display, use the suction cup to lift the screen after removing the necessary screws and connectors.
• For the camera, disconnect the camera module connector and remove it from the housing.
• Replace with the new component and secure with screws and connectors.

6. Reassemble the Device

• After replacing the necessary parts, carefully place the back cover back onto the device.
• Ensure all clips and connectors are securely in place.
• Power on the device to test the new components.

By following these detailed instructions, you can effectively replace the main components (repuestos) of your Oukitel K8.