Oukitel K9 Pro spare parts

Oukitel K9 Pro Repuestos Technical Characteristics

The Oukitel K9 Pro is a versatile smartphone known for its durability and performance. When it comes to replacing parts (repuestos), it's crucial to know the specific technical characteristics of the components you are handling. Below are the technical characteristics of common Oukitel K9 Pro repuestos:

1. LCD Display

• Size: 6.95 inches
• Resolution: 1080 x 2160 pixels
• Type: IPS LCD capacitive touchscreen, 16M colors

2. Battery

• Capacity: 5000mAh
• Type: Li-Po non-removable
• Voltage: 3.85V

3. Camera

• Rear Camera: 16 MP + 2 MP
• Front Camera: 8 MP
• Features: LED flash, HDR, panorama

4. Charging Port

• Type: USB-C
• Power Delivery: Fast charging 18W

Instructions on How to Replace Oukitel K9 Pro Repuestos

1. Replacing the LCD Display

Before you begin, make sure to turn off the device and remove the SIM card tray.

• 1. Remove the back cover using a suction cup and a plastic prying tool.
• 2. Unscrew all visible screws to loosen the middle frame.
• 3. Carefully disconnect the battery connector to prevent any short-circuit.
• 4. Use a heat gun to gently warm the edges of the LCD screen.
• 5. Insert a plastic pry tool between the frame and the screen to separate them.
• 6. Once the LCD screen is detached, disconnect the display cable.
• 7. Attach the new LCD display by connecting the display cable.
• 8. Align the screen properly and press it gently into the frame.
• 9. Reconnect the battery connector and screw back the middle frame.
• 10. Attach the back cover and insert the SIM card tray back.

2. Replacing the Battery

Ensure the device is turned off before starting the battery replacement.

• 1. Use a suction cup and prying tool to remove the back cover.
• 2. Unscrew the screws securing the battery connector cover and remove it.
• 3. Disconnect the battery connector to avoid short-circuiting.
• 4. Use a plastic card to pry out the battery from its compartment carefully.
• 5. Insert the new battery and reconnect the battery connector.
• 6. Screw back the battery connector cover.
• 7. After securing everything, place the back cover back on the phone.

3. Replacing the Charging Port

Follow these steps after ensuring the device is completely turned off.

• 1. Remove the back cover using a suction cup and a plastic prying tool.
• 2. Unscrew the screws to take off the middle frame and the battery connector cover.
• 3. Disconnect the battery connector.
• 4. Locate the charging port flex cable and disconnect it from the motherboard.
• 5. Carefully remove the faulty charging port and replace it with the new one.
• 6. Reconnect the charging port flex cable to the motherboard.
• 7. Reconnect the battery connector, then screw back the battery connector cover.
• 8. Replace the middle frame and back cover, ensuring everything is securely fastened.

4. Replacing the Rear Camera

Ensure the device is powered off before attempting to replace the rear camera.

• 1. Remove the back cover using a suction cup and a pry tool.
• 2. Unscrew the screws securing the middle frame and remove it.
• 3. Disconnect the battery connector.
• 4. Locate the rear camera module and disconnect its flex cable.
• 5. Carefully remove the old camera module.
• 6. Insert the new camera module and connect its flex cable.
• 7. Reconnect the battery connector and reassemble the middle frame.
• 8. Secure the back cover back onto the device.

By following these detailed steps, you can successfully replace various parts (repuestos) of the Oukitel K9 Pro without encountering significant issues. Always ensure to handle each component with care to avoid any damage.