Oukitel K9 spare parts

Oukitel K9 Technical Characteristics and Replacement Instructions

Technical Characteristics

• Display: 7.12-inch IPS LCD, 1080 x 2244 pixels
• Processor: MediaTek Helio P35
• RAM: 4GB
• Storage: 64GB, expandable via microSD
• Battery: 6000mAh
• Main Camera: Dual 16 MP + 2 MP
• Front Camera: 8 MP
• Operating System: Android 9.0 (Pie)

Instructions for Replacing Oukitel K9 Parts

Below are detailed instructions to assist you in replacing the various components of the Oukitel K9. Please ensure you have the necessary tools and take all necessary precautions to avoid damage or injury.

Tools Needed:

• Phillips #00 Screwdriver
• Plastic Pry Tool
• SIM Card Eject Tool
• Suction Cup
• Spudger

Steps to Replace the Battery

• Step 1: Power off the device.
• Step 2: Remove the SIM card tray using the SIM card eject tool.
• Step 3: Use a suction cup to lift the back cover slightly, then insert a plastic pry tool and gently work your way around to unclip the cover.
• Step 4: Remove the screws securing the battery connector shield using a Phillips #00 screwdriver.
• Step 5: Disconnect the battery connector using a spudger.
• Step 6: Lift the battery carefully using the plastic pry tool. Be mindful of the adhesive securing the battery.
• Step 7: Insert the new battery and connect the battery connector back.
• Step 8: Screw back the battery connector shield.
• Step 9: Reattach the back cover by pressing around the edges to ensure it snaps back into place.
• Step 10: Insert the SIM card tray back into the device.
• Step 11: Power on the device to verify the replacement was successful.

Steps to Replace the Display

• Step 1: Power off the device.
• Step 2: Remove the SIM card tray using the SIM card eject tool.
• Step 3: Use a suction cup to lift the back cover slightly, then insert a plastic pry tool and gently work your way around to unclip the cover.
• Step 4: Remove the screws securing the battery connector shield using a Phillips #00 screwdriver.
• Step 5: Disconnect the battery connector using a spudger.
• Step 6: Disconnect the display connector.
• Step 7: Apply a heated iOpener or heat gun to the edges of the display to soften the adhesive.
• Step 8: Use a suction cup to lift the display slightly and insert a plastic pry tool to gently separate the display from the frame.
• Step 9: Carefully remove the display.
• Step 10: Place the new display into the frame and connect the display connector.
• Step 11: Reconnect the battery connector and screw back the battery connector shield.
• Step 12: Reattach the back cover by pressing around the edges to ensure it snaps back into place.
• Step 13: Insert the SIM card tray back into the device.
• Step 14: Power on the device to verify the replacement was successful.