Oukitel U13 spare parts

Technical Characteristics of Oukitel U13 Repuestos

The Oukitel U13 is known for its durability and versatile features. Below are the technical characteristics of the main repuestos (spare parts) available for this model:

• Screen: 5.5-inch, Full HD (1920x1080) IPS, capacitive touch screen.
• Battery: Li-Po 3000mAh, non-removable.
• Camera: Rear Camera: 13MP, Front Camera: 8MP.
• Memory: 3GB RAM, 64GB internal storage.
• Processor: Octa-core, MediaTek MT6753.
• Operating System: Android 6.0 Marshmallow.
• Other components: Fingerprint sensor, USB Type-C port, dual SIM slots.

Instructions on How to Replace Oukitel U13 Repuestos

1. Replacing the Screen

To replace the screen of the Oukitel U13, follow these steps:

• Turn off your phone and remove the SIM card tray.
• Gently heat the edges of the front screen using a heat gun or hair dryer to soften the adhesive.
• Use a plastic prying tool to carefully lift the screen away from the frame. Start from the corners and move along the edges.
• Disconnect the ribbon cables that connect the screen to the motherboard.
• Remove the old screen and set the new screen in place.
• Reconnect the ribbon cables and carefully fit the new screen into the frame.
• Apply slight pressure to ensure the adhesive binds well and re-insert the SIM card tray.
• Turn on the phone to check if the new screen is functioning correctly.

2. Replacing the Battery

To replace the battery, follow these steps:

• Turn off your phone.
• Remove the back cover of the phone by gently prying it open using a plastic tool.
• Locate the battery and disconnect the connector that attaches it to the motherboard.
• Carefully remove the old battery. If it’s glued in, use a bit of heat to soften the adhesive.
• Place the new battery in the same position and reconnect the connector.
• Make sure the new battery is securely in place and fits well with no loose connections.
• Replace the back cover and turn on the phone to ensure the new battery is working.

3. Replacing the Camera

To replace the camera, follow these steps:

• Turn off your phone and remove the back cover.
• Locate the camera module attached to the motherboard.
• Disconnect the ribbon cable connecting the camera to the motherboard.
• Carefully remove the old camera module.
• Place the new camera module in the same position and reconnect the ribbon cable.
• Ensure the new camera is securely in place.
• Replace the back cover and turn on the phone to test the new camera.

Following these detailed instructions will help you replace various repuestos of the Oukitel U13 effectively. If you encounter any difficulties, consider consulting a professional technician.