Oukitel U15 Pro

Oukitel U15 Pro Technical Characteristics

The Oukitel U15 Pro is a mid-range smartphone that offers a number of impressive features for its price range. Below are the key technical characteristics of the Oukitel U15 Pro:

• Display: 5.5 inches, 720 x 1280 pixels, IPS LCD
• Processor: MediaTek MTK6753, Octa-core 1.3 GHz Cortex-A53
• RAM: 3GB
• Internal Storage: 32GB
• External Storage: microSD, up to 128GB
• Camera: Rear - 16 MP, Front - 5 MP
• Battery: 3000 mAh, Non-removable Li-Ion
• Operating System: Android 6.0 (Marshmallow)
• SIM: Dual SIM (Micro-SIM, dual stand-by)
• Dimensions: 154 x 78.6 x 9.0 mm
• Weight: 201 grams

Instructions on How to Replace Oukitel U15 Pro

Replacing the Oukitel U15 Pro can involve several steps depending on whether you are replacing the battery, screen, or another component. Below is a detailed guide on how to replace a damaged screen on the Oukitel U15 Pro.

Tools and Materials Needed

• Phillips #00 Screwdriver
• Plastic Opening Tools
• Spudger
• Suction Cup
• Tweezers
• Replacement Screen

Step-by-Step Instructions

• Step 1: Power off the device completely.
• Step 2: Remove the SIM card tray using a SIM ejector tool or a paperclip.
• Step 3: Use a Phillips #00 screwdriver to remove the two screws at the bottom of the phone near the charging port.
• Step 4: Insert the plastic opening tool between the back cover and the frame of the phone. Carefully work your way around the edges to release the clips holding the back cover in place.
• Step 5: Once the back cover is off, disconnect the battery connector using a spudger to avoid any short circuits.
• Step 6: Use the Phillips #00 screwdriver to unscrew the screws holding the metal shield that covers the display and battery connectors. Remove the shield.
• Step 7: Disconnect the display connectors from the motherboard using the spudger.
• Step 8: Use a suction cup to gently lift the old screen from the frame. If needed, use the plastic opening tool to help separate the screen from the adhesive. Be careful not to damage the ribbon cables.
• Step 9: Once the old screen is detached, remove any remaining adhesive from the frame to ensure a smooth installation of the new screen.
• Step 10: Connect the new screen's ribbon cables to the motherboard.
• Step 11: Replace the metal shield over the connectors and secure it with screws.
• Step 12: Reconnect the battery connector.
• Step 13: Snap the back cover back onto the frame of the phone, ensuring all clips are secure.
• Step 14: Replace the two screws at the bottom of the phone near the charging port.
• Step 15: Power on the device to test the new screen to ensure it is functioning correctly.

By following these detailed steps, you can successfully replace the screen on your Oukitel U15 Pro. If you encounter any difficulties, it is recommended to seek assistance from a professional technician.