Oukitel U16 Max spare parts

Oukitel U16 Max Technical Characteristics and Replacement Instructions

Technical Characteristics

The Oukitel U16 Max is a robust smartphone known for its durability and performance. Below are the key technical characteristics of the Oukitel U16 Max:

• Screen Size: 6.0 inches
• Resolution: 720 x 1280 pixels
• Processor: MT6753 Octa Core 1.3GHz
• RAM: 3GB
• Internal Storage: 32GB (expandable up to 128GB with microSD card)
• Rear Camera: 13 MP
• Front Camera: 5 MP
• Battery: 4000mAh
• Operating System: Android 7.0

Replacement Instructions

Replacing parts (repuestos) in the Oukitel U16 Max requires careful attention to detail. The following steps outline the process for replacing the battery, screen, and other significant components:

Tools Needed:

• Precision screwdriver set
• Plastic opening tools
• Suction cup
• Adhesive tape
• Anti-static wrist strap (recommended)

Battery Replacement

Step-by-Step Instructions:

• 1. Power off the device completely.
• 2. Use a precision screwdriver to remove the screws from the back cover.
• 3. Pry off the back cover with a plastic opening tool.
• 4. Disconnect the battery connector carefully.
• 5. Remove the old battery by lifting it gently using the plastic opening tool.
• 6. Place the new battery in the compartment.
• 7. Reconnect the battery connector.
• 8. Replace the back cover and secure it with the screws.

Screen Replacement

Step-by-Step Instructions:

• 1. Power off the device completely.
• 2. Remove the SIM card tray.
• 3. Use a suction cup to lift the screen slightly and insert a plastic opening tool to separate the screen from the frame.
• 4. Carefully disconnect the flex cables of the screen from the motherboard.
• 5. Remove the screen completely.
• 6. Place the new screen in position and reconnect the flex cables to the motherboard.
• 7. Carefully align and press down the new screen into the frame.
• 8. Replace the SIM card tray.

Other Component Replacements

For replacing other components such as the camera or speakers, follow these general steps:

• 1. Power off the device completely.
• 2. Remove the back cover as described previously.
• 3. Identify the component that needs replacing.
• 4. Disconnect any flex cables or connectors associated with the component.
• 5. Remove the screws or adhesives holding the component in place.
• 6. Replace the component with a new one.
• 7. Reconnect all flex cables or connectors.
• 8. Reassemble the device by following the disassembly steps in reverse order.

By following these instructions, you can carefully replace the necessary components in your Oukitel U16 Max. Always ensure to work in a clean, static-free environment.