Oukitel U18 spare parts

Technical Characteristics of Oukitel U18 Repuestos

Oukitel U18 is a smartphone with notable features that require specific replacement parts (repuestos) when undergoing repair. Below are the technical characteristics of the essential repuestos.

Display

• Size: 5.85 inches
• Resolution: 720 x 1512 pixels
• Type: IPS LCD capacitive touchscreen, 16M colors

Battery

• Type: Li-Ion 4000 mAh
• Non-removable

Camera Module

• Primary: Dual 16 MP + 5 MP
• Features: LED flash, HDR, panorama
• Secondary: 13 MP

Motherboard

• Chipset: MediaTek MT6750T
• CPU: Octa-core 1.5 GHz Cortex-A53
• GPU: Mali-T860MP2

Other Components

• Fingerprint Sensor: Rear-mounted
• Charging Port: Micro USB 2.0
• SIM Tray: Dual SIM (Nano-SIM, dual stand-by)

Instructions for Replacing Oukitel U18 Repuestos

These are the detailed steps for replacing various repuestos in your Oukitel U18. Ensure you have the appropriate replacement parts and tools before proceeding.

Replacing the Display

• 1. Power off the device.
• 2. Use a heat gun or hair dryer to gently heat around the edges to loosen the adhesive.
• 3. Insert a plastic opening tool between the screen and frame, carefully prying them apart.
• 4. Disconnect the display ribbon cable from the motherboard gently.
• 5. Attach the new display ribbon cable to the motherboard.
• 6. Align the new display and press it firmly to secure it in place with adhesive.
• 7. Allow the adhesive to set before powering on and testing the new display.

Replacing the Battery

• 1. Power off the device.
• 2. Remove the back cover using a thin plastic tool.
• 3. Unscrew the screws securing the metal shield to access the battery connector.
• 4. Disconnect the battery connector from the motherboard.
• 5. Use a plastic tool to gently lift and remove the old battery.
• 6. Insert the new battery and connect it to the motherboard.
• 7. Secure the metal shield with screws and reattach the back cover.
• 8. Power on the device to test the new battery.

Replacing the Camera Module

• 1. Power off the device.
• 2. Remove the back cover using a plastic opening tool.
• 3. Unscrew the screws securing the camera module shield.
• 4. Disconnect the camera module from the motherboard.
• 5. Remove the old camera module carefully.
• 6. Install the new camera module and connect it to the motherboard.
• 7. Secure the camera shield with screws and reattach the back cover.
• 8. Power on the device to test the new camera module.