Oukitel U2 spare parts

Oukitel U2 Technical Characteristics and Replacement Instructions

Technical Characteristics of Oukitel U2 Repuestos

The Oukitel U2 smartphone comes with the following technical specifications:

• Screen Size: 5.0 inches, 720 x 1280 pixels
• Processor: Quad-core 1.3 GHz
• RAM: 1 GB
• Internal Storage: 8 GB (expandable via microSD up to 32 GB)
• Rear Camera: 8 MP
• Front Camera: 5 MP
• Battery: Non-removable Li-Ion 2050 mAh
• OS: Android 5.1 (Lollipop)

Instructions for Replacing Oukitel U2 Repuestos

Follow these detailed steps to replace components in your Oukitel U2:

Required Tools

• Pentalobe screwdriver
• Phillips screwdriver
• Plastic pry tools
• Tweezers
• Adhesive strips
• Replacement parts (screen, battery, etc.)

Steps to Replace the Screen

1. Power Off: Ensure the phone is completely powered off before proceeding.
2. Remove SIM Tray: Use a SIM eject tool to remove the SIM tray.
3. Unfasten Screws: Use the pentalobe screwdriver to remove the screws at the bottom of the phone.
4. Open the Case: Gently insert a plastic pry tool between the screen and the rear case to separate them. Carefully work your way around the device to detach the clips securing the case.
5. Disconnect Battery: Locate and disconnect the battery connector using tweezers.
6. Remove Old Screen: Use the Phillips screwdriver to remove screws securing the old screen. Carefully lift the screen away from the device.
7. Attach New Screen: Align the new screen and secure it using the previously removed screws.
8. Reconnect Battery: Reattach the battery connector.
9. Seal Case: Press the rear case back onto the device, ensuring all clips are securely fastened, then replace the screws at the bottom.
10. Reinsert SIM Tray: Insert the SIM tray back into its slot.
11. Power On: Power on the device to verify the new screen is functioning properly.

Steps to Replace the Battery

1. Power Off: Ensure the phone is completely powered off before proceeding.
2. Remove SIM Tray: Use a SIM eject tool to remove the SIM tray.
3. Unfasten Screws: Use the pentalobe screwdriver to remove the screws at the bottom of the phone.
4. Open the Case: Gently insert a plastic pry tool between the screen and the rear case to separate them. Carefully work your way around the device to detach the clips securing the case.
5. Disconnect Battery: Locate and disconnect the battery connector using tweezers.
6. Remove Old Battery: Carefully lift and remove the old battery from the device. You may need the plastic pry tool to help loosen it if adhesive is used.
7. Install New Battery: Place the new battery in the same position and reconnect the battery connector.
8. Seal Case: Press the rear case back onto the device, ensuring all clips are securely fastened, then replace the screws at the bottom.
9. Reinsert SIM Tray: Insert the SIM tray back into its slot.
10. Power On: Power on the device to verify the new battery is functioning properly.

Follow these steps meticulously to ensure proper replacement of parts and to maintain the functionality of your Oukitel U2 smartphone.