Oukitel U22 spare parts

Technical Characteristics of Oukitel U22 Repuestos

The Oukitel U22 is equipped with several key components that you may need to replace over the lifespan of the phone. Below are the technical characteristics of these parts:

• Display: 5.5-inch IPS LCD, 720 x 1280 pixels resolution
• Battery: 2700 mAh Li-Po battery
• Rear Camera: Dual 8 MP + 2 MP cameras
• Front Camera: Dual 5 MP + 2 MP cameras
• Processor: MediaTek MT6580A Quad-core 1.3 GHz Cortex-A7
• RAM: 2 GB
• Storage: 16 GB, expandable via microSD card
• Operating System: Android 7.0 (Nougat)

Instructions on How to Replace Oukitel U22 Repuestos

Tools Needed:

• Phillips screwdriver
• Plastic prying tools
• Suction cup
• Tweezers
• Replacement part (e.g., screen, battery)
• Adhesive strips (if applicable)

Step-by-Step Replacement Instructions:

1. Power Off the Device

Before starting any repair, make sure the device is completely powered off to prevent any electrical hazards.

2. Remove the Back Cover

Use a plastic prying tool to gently remove the back cover. Start at one corner and work your way around the edges until it snaps off.

3. Disconnect the Battery

Locate the battery connector and use a plastic prying tool to carefully disconnect it. This will ensure that no power is flowing through the device during the repair.

4. Remove Necessary Screws

Using a Phillips screwdriver, remove all screws that are securing the part you need to replace (e.g., display assembly, battery, camera module). Make sure to keep track of all screws as they can be easily lost.

5. Disconnect Flex Cables

Use tweezers to disconnect any flex cables connected to the part you are replacing. Be very gentle to avoid tearing the cables.

6. Remove the Old Part

Carefully remove the faulty part from the device. If you are replacing the screen, use a suction cup to lift the screen off the frame while prying around the edges with a plastic tool.

7. Install the New Part

Place the new part into the device, making sure it fits snugly in place. Reconnect any flex cables you previously disconnected.

8. Secure Screws and Reconnect Battery

Screw all parts back into place using the Phillips screwdriver. Reconnect the battery connector to restore power to the device.

9. Reattach the Back Cover

Snap the back cover back onto the device. Make sure all clips are securely in place.

10. Power On the Device and Test

Turn on the device and test the new part to ensure it is functioning correctly.

Following these steps carefully will help you successfully replace the parts of your Oukitel U22. If you encounter any issues, consult with a professional technician.