Oukitel U25 Pro spare parts

    There are 10 products.

    Technical Characteristics of Oukitel U25 Pro Replacement Parts

    The Oukitel U25 Pro is a robust smartphone, but like any device, it may need replacement parts over time. Below are the key components and their technical characteristics:

    Display

    • Size: 5.5 inches
    • Resolution: 1080 x 1920 pixels
    • Type: LCD capacitive touchscreen
    • Protection: Cor...

    Technical Characteristics of Oukitel U25 Pro Replacement Parts

    The Oukitel U25 Pro is a robust smartphone, but like any device, it may need replacement parts over time. Below are the key components and their technical characteristics:

    Display

    • Size: 5.5 inches
    • Resolution: 1080 x 1920 pixels
    • Type: LCD capacitive touchscreen
    • Protection: Corning Gorilla Glass

    Battery

    • Capacity: 3200 mAh
    • Type: Li-Ion, non-removable

    Camera

    • Primary: Dual 13 MP + 2 MP
    • Secondary: 5 MP

    Mainboard

    • Chipset: MediaTek MT6750T
    • CPU: Octa-core 1.5 GHz Cortex-A53
    • GPU: Mali-T860MP2

    Instructions for Replacing Oukitel U25 Pro Parts

    Follow the steps below to replace parts on your Oukitel U25 Pro safely:

    1. Display Replacement

    • Power off the phone and remove the SIM card tray.
    • Use a small Philips screwdriver to remove all screws from the back cover.
    • Gently pry open the back cover using a plastic opening tool.
    • Disconnect the battery connector and the display connector from the motherboard.
    • Remove the damaged display and replace it with a new one. Ensure all connectors are securely reattached.
    • Reassemble the phone by reversing the steps.

    2. Battery Replacement

    • Turn off the phone and remove the back cover as described in the display replacement section.
    • Disconnect the battery connector carefully from the mainboard.
    • Use a plastic spudger to pry the old battery loose from the adhesive.
    • Place the new battery into the compartment and reconnect the battery connector to the mainboard.
    • Reassemble the device by replacing the back cover and screws.

    3. Camera Replacement

    • Power off the device and remove the back cover and battery connector as previously instructed.
    • Locate and disconnect the camera connectors from the mainboard.
    • Carefully remove the old camera module and replace it with a new one.
    • Reconnect the camera connectors and battery connector.
    • Replace the back cover and secure it with screws.

    Ensure you follow these instructions carefully to avoid damaging your device. If unsure, seek professional assistance.

    Less
    More
    Showing 1 - 10 of 10 items