Oukitel U7 Plus

Technical Characteristics of Oukitel U7 Plus

The Oukitel U7 Plus is a budget-friendly smartphone with several notable features:

• Screen Size: 5.5 inches
• Resolution: 1280 x 720 pixels
• Processor: MediaTek MT6737 Quad-core 1.3 GHz
• RAM: 2GB
• Internal Storage: 16GB (expandable up to 32GB via microSD)
• Rear Camera: 13 MP
• Front Camera: 5 MP
• Battery Capacity: 2500mAh
• Operating System: Android 6.0 Marshmallow
• Network: 4G LTE

Instructions for Replacing Parts in Oukitel U7 Plus

Follow these detailed steps to replace parts in your Oukitel U7 Plus:

1. Disassembly

Begin by turning off your phone and removing the back cover and battery.

• Use a plastic pry tool to gently lift the back cover from its edges.
• Remove the battery by lifting it from the designated slot.

2. Remove Screws

Using a small Phillips screwdriver, remove the screws that secure the mid-frame.

• Keep all screws in a safe place, as you will need them for reassembly.

3. Separate Mid-frame

Carefully use a pry tool to separate the mid-frame from the front assembly.

• Be cautious of the ribbon cables connecting the two parts.

4. Disconnect Ribbon Cables

Using tweezers, carefully disconnect all ribbon cables connecting the motherboard to other components like the screen and camera.

• Ensure you remember the location of each cable for reassembly.

5. Replace the Desired Component

You can now replace the desired component, such as the screen or camera:

• If replacing the screen, gently lift it from the front housing.
• If replacing the camera, carefully unscrew and lift it from its slot.

6. Reconnect Ribbon Cables

After replacing the component, reconnect all ribbon cables back to their respective slots on the motherboard.

7. Reassemble

Carefully put the mid-frame back in place and secure it with the screws removed earlier.

• Ensure all components are firmly in place before proceeding.

8. Final Assembly

Replace the battery and the back cover.

• Press down gently on the back cover until it clicks into place.

9. Power On

Turn on your phone to ensure the replacement part is functioning properly.

Following these steps will help you successfully replace parts in your Oukitel U7 Plus. If you experience any issues, consider seeking help from a professional technician.