Oukitel WP10 spare parts
There are 25 products.Oukitel WP10 Technical Characteristics
The Oukitel WP10 is a rugged smartphone known for its durability and extensive features. The technical characteristics include:
Specifications
- Display: 6.67-inch FHD+, 2400 x 1080 pixels resolution
- Processor: MediaTek Dimensity 800, Octa-core 2.0 GHz
- RAM: 8GB
- Storage: 128GB (expandable via microSD c...
Oukitel WP10 Technical Characteristics
The Oukitel WP10 is a rugged smartphone known for its durability and extensive features. The technical characteristics include:
Specifications
- Display: 6.67-inch FHD+, 2400 x 1080 pixels resolution
- Processor: MediaTek Dimensity 800, Octa-core 2.0 GHz
- RAM: 8GB
- Storage: 128GB (expandable via microSD card)
- Battery: 8000mAh, non-removable
- Rear Camera: Quad 48MP + 13MP + 2MP + 2MP
- Front Camera: 16MP
- Operating System: Android 10
Instructions for Replacing Oukitel WP10 Repuestos
Required Tools
- Phillips screwdriver
- Plastic opening tools
- Tweezers
- Suction cup
- Heat gun or hairdryer
Steps to Replace the Screen
- Power off the device and remove any SIM cards or expandable memory.
- Use a heat gun or hairdryer to soften the adhesive around the edges of the screen.
- Place a suction cup on the screen and gently pull to create a small gap.
- Insert a plastic opening tool into the gap and carefully work your way around the screen to separate it from the device frame.
- Disconnect the screen's flex cables from the motherboard.
- Remove the old screen and replace it with the new repuesto by connecting the flex cables to the motherboard.
- Reapply adhesive around the edges or use pre-cut adhesive strips for the new screen.
- Press the new screen firmly into place, ensuring it adheres properly to the frame.
- Power on the device to check if the new screen is working properly.
Steps to Replace the Battery
- Power off the device and remove any SIM cards or expandable memory.
- Remove the back cover by unscrewing the Phillips screws and using a plastic opening tool to pry it open.
- Disconnect the battery connector from the motherboard.
- Use a plastic opening tool to gently lift the battery out of its compartment. Be careful not to puncture or bend the battery.
- Insert the new battery into the compartment and connect it to the motherboard.
- Replace the back cover and secure it with the Phillips screws.
- Power on the device to check if the new battery is working properly.
Less More Showing 1 - 25 of 25 items
Available
Disponible
Disponible
Disponible
Out of stock
Disponible
Disponible
Disponible
Available
Disponible
Disponible
Disponible
Out of stock
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Available
Disponible
Disponible
Available
Disponible
Available