Oukitel WP10 spare parts
There are 25 products.Oukitel WP10 Technical Characteristics
The Oukitel WP10 is a rugged smartphone known for its durability and extensive features. The technical characteristics include:
Specifications
- Display: 6.67-inch FHD+, 2400 x 1080 pixels resolution
- Processor: MediaTek Dimensity 800, Octa-core 2.0 GHz
- RAM: 8GB
- Storage: 128GB (expandable via microSD c...
Oukitel WP10 Technical Characteristics
The Oukitel WP10 is a rugged smartphone known for its durability and extensive features. The technical characteristics include:
Specifications
- Display: 6.67-inch FHD+, 2400 x 1080 pixels resolution
- Processor: MediaTek Dimensity 800, Octa-core 2.0 GHz
- RAM: 8GB
- Storage: 128GB (expandable via microSD card)
- Battery: 8000mAh, non-removable
- Rear Camera: Quad 48MP + 13MP + 2MP + 2MP
- Front Camera: 16MP
- Operating System: Android 10
Instructions for Replacing Oukitel WP10 Repuestos
Required Tools
- Phillips screwdriver
- Plastic opening tools
- Tweezers
- Suction cup
- Heat gun or hairdryer
Steps to Replace the Screen
- Power off the device and remove any SIM cards or expandable memory.
- Use a heat gun or hairdryer to soften the adhesive around the edges of the screen.
- Place a suction cup on the screen and gently pull to create a small gap.
- Insert a plastic opening tool into the gap and carefully work your way around the screen to separate it from the device frame.
- Disconnect the screen's flex cables from the motherboard.
- Remove the old screen and replace it with the new repuesto by connecting the flex cables to the motherboard.
- Reapply adhesive around the edges or use pre-cut adhesive strips for the new screen.
- Press the new screen firmly into place, ensuring it adheres properly to the frame.
- Power on the device to check if the new screen is working properly.
Steps to Replace the Battery
- Power off the device and remove any SIM cards or expandable memory.
- Remove the back cover by unscrewing the Phillips screws and using a plastic opening tool to pry it open.
- Disconnect the battery connector from the motherboard.
- Use a plastic opening tool to gently lift the battery out of its compartment. Be careful not to puncture or bend the battery.
- Insert the new battery into the compartment and connect it to the motherboard.
- Replace the back cover and secure it with the Phillips screws.
- Power on the device to check if the new battery is working properly.
Less More Showing 1 - 25 of 25 items
Disponible
Disponible
Disponible
Disponible
Out of stock
Disponible
Disponible
Disponible
Available
Disponible
Disponible
Disponible
Out of stock
Disponible
Disponible
Disponible
Disponible
Disponible
Disponible
Available
Out of stock
Disponible
Available
Disponible
Available