Oukitel WP12 spare parts

Oukitel WP12 Technical Characteristics and Replacement Instructions

Technical Characteristics

The Oukitel WP12 is a rugged smartphone designed for durability and reliable performance. Below are the key technical specifications:

• Processor: MediaTek Helio A22, Quad-Core 1.8GHz
• RAM: 4GB
• Storage: 32GB internal, expandable via microSD up to 256GB
• Display: 5.5 inches HD+ (720 x 1440 pixels)
• Camera: Dual Rear 13MP + 2MP, Front 5MP
• Battery: 4000mAh
• Operating System: Android 11
• Certifications: IP68/IP69K, MIL-STD-810G

Instructions for Replacing Oukitel WP12 Components

Follow these detailed steps to replace the components of the Oukitel WP12. Ensure you have the necessary tools and replacement parts before starting.

Replacing the Battery

• Step 1: Power off the phone completely.
• Step 2: Remove the screws from the back cover using a Phillips screwdriver.
• Step 3: Gently pry open the back cover using a plastic opening tool.
• Step 4: Disconnect the battery connector from the motherboard.
• Step 5: Carefully remove the old battery.
• Step 6: Insert the new battery and reconnect the battery connector.
• Step 7: Place the back cover back on and secure it with the screws.
• Step 8: Power on the phone to ensure the new battery is working properly.

Replacing the Screen

• Step 1: Power off the phone completely.
• Step 2: Remove the screws securing the back cover using a Phillips screwdriver.
• Step 3: Use a plastic opening tool to carefully pry open the back cover.
• Step 4: Disconnect the battery and other connectors attached to the motherboard.
• Step 5: Remove the screws securing the motherboard and gently lift it out.
• Step 6: Gently heat the edges of the screen to soften the adhesive (use a heat gun or hairdryer).
• Step 7: Use a plastic tool to gently pry the old screen away from the frame.
• Step 8: Carefully place the new screen into the frame, ensuring all connectors align properly.
• Step 9: Reconnect all connectors to the motherboard and secure the motherboard back in place with screws.
• Step 10: Reattach the back cover and secure it with screws.
• Step 11: Power on the phone to ensure the new screen is functioning correctly.

Replacing the Camera

• Step 1: Power off the phone completely.
• Step 2: Remove the screws from the back cover using a Phillips screwdriver.
• Step 3: Use a plastic opening tool to gently pry open the back cover.
• Step 4: Disconnect the battery and then the camera connector from the motherboard.
• Step 5: Carefully remove the old camera from its slot.
• Step 6: Insert the new camera into the slot and reconnect the camera connector to the motherboard.
• Step 7: Reattach the battery connector and place the back cover back on, securing it with screws.
• Step 8: Power on the phone to ensure the new camera is functioning correctly.

Replacing the SIM Card Tray

• Step 1: Power off the phone completely.
• Step 2: Locate the SIM card tray on the side of the phone.
• Step 3: Use the SIM eject tool to push into the small hole next to the SIM tray.
• Step 4: Gently pull out the SIM tray.
• Step 5: Place the new SIM card tray into the slot.
• Step 6: Push the tray in until it clicks into place.
• Step 7: Power on the phone and confirm the SIM card is recognized.

These instructions should help you successfully replace various components of the Oukitel WP12. Always handle the phone and its components with care to prevent any damage.