Oukitel WP15 spare parts

Technical Characteristics of Oukitel WP15 Repuestos

The Oukitel WP15 is a rugged smartphone known for its durability and performance. Here are some key technical characteristics of its repuestos (replacement parts):

• Battery: 15600mAh Li-Po non-removable battery providing extended usage time
• Screen: 6.52 inches, 720 x 1600 pixels resolution, IPS LCD capacitive touchscreen
• Processor: MediaTek Dimensity 700, Octa-core
• Memory: 8GB RAM and 128GB internal storage, expandable up to 256GB
• Camera: Triple rear camera setup: 48 MP (primary), 2 MP (macro), 0.3 MP (depth), and an 8 MP front camera
• Operating System: Android 11
• Connectivity: 5G, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.1, NFC
• Other Features: IP68/IP69K water and dust resistance, MIL-STD-810G compliant, side-mounted fingerprint sensor

Instructions on How to Replace Oukitel WP15 Repuestos

Replacing the Battery

Note: The Oukitel WP15 comes with a non-removable battery. Replacing it yourself might void the warranty and can be risky. It is recommended to visit a professional technician for battery replacement.

• Step 1: Power off the phone and remove any SIM cards and memory cards.
• Step 2: Use a screwdriver to remove all screws from the back cover.
• Step 3: Use a plastic opening tool to carefully pry open the back cover. Be gentle to avoid damaging internal components.
• Step 4: Locate the battery connector and gently disconnect it from the motherboard.
• Step 5: Carefully remove the battery from its compartment. Some adhesive might be holding it, so proceed with caution.
• Step 6: Place the new battery into the compartment and reconnect the battery connector to the motherboard.
• Step 7: Reattach the back cover and secure it with the screws.
• Step 8: Power on the device to ensure the new battery is working correctly.

Replacing the Screen

• Step 1: Power off the phone and remove any SIM cards and memory cards.
• Step 2: Remove all screws from the back cover using a screwdriver.
• Step 3: Carefully pry open the back cover using a plastic opening tool.
• Step 4: Disconnect the battery connector to prevent any electrical damage during the repair.
• Step 5: Locate the screen connectors and gently disconnect them from the motherboard.
• Step 6: Use a heat gun or hairdryer to soften the adhesive holding the screen in place.
• Step 7: Use a suction cup and plastic opening tool to carefully lift and remove the damaged screen.
• Step 8: Remove any remaining adhesive from the frame.
• Step 9: Apply new adhesive around the frame and carefully place the new screen onto the phone.
• Step 10: Reconnect the screen connectors to the motherboard.
• Step 11: Reconnect the battery connector and replace the back cover, securing it with screws.
• Step 12: Power on the device to ensure the new screen is functioning properly.

Replacing the Camera Module

• Step 1: Power off the phone and remove any SIM cards and memory cards.
• Step 2: Remove all screws from the back cover using a screwdriver.
• Step 3: Carefully pry open the back cover using a plastic opening tool.
• Step 4: Locate the camera module connectors on the motherboard and gently disconnect them.
• Step 5: Carefully remove the camera module from its place.
• Step 6: Place the new camera module into the corresponding slot.
• Step 7: Reconnect the camera module connectors to the motherboard.
• Step 8: Reattach the back cover and secure it with the screws.
• Step 9: Power on the device to ensure the new camera module is working correctly.

Always handle the phone and its components with care during repairs. If you are not confident in performing these replacements yourself, it is recommended to consult with a professional technician.