Oukitel WP19 Spare Parts

Technical Characteristics of Oukitel WP19 Repuestos

The Oukitel WP19 is a rugged smartphone known for its durability and powerful features. Below are its technical characteristics:

• Screen Size: 6.78 inches
• Resolution: 2400 x 1080 pixels
• Processor: MediaTek Helio G95
• RAM: 8 GB
• Storage: 128 GB (expandable via microSD up to 256 GB)
• Battery Capacity: 21000 mAh
• Operating System: Android 12
• Primary Camera: 64 MP + 20 MP + 2 MP
• Front Camera: 16 MP
• Waterproof Rating: IP68/IP69K
• Certification: MIL-STD-810G

Instructions to Replace Oukitel WP19 Repuestos

Replacing parts on the Oukitel WP19 requires careful attention to detail to avoid damaging the device. Follow these steps:

Tools and Materials Needed:

• 1. Precision screwdriver set
• 2. Plastic opening tools
• 3. Tweezers
• 4. Adhesive strips
• 5. Replacement part(s)
• 6. Anti-static wrist strap (optional but recommended)

Step-by-Step Instructions:

• Step 1:

  Turn off the Oukitel WP19 and remove the SIM card tray.

• Step 2:

  Using a precision screwdriver, remove the screws securing the back cover. Keep these screws safe as you will need them to reassemble the device.

• Step 3:

  Use a plastic opening tool to gently pry open the back cover. Start at one corner and work your way around. Be cautious to avoid damaging the clips or the plastic.

• Step 4:

  Disconnect the battery connector using tweezers. This reduces the risk of short circuits while working on the device.

• Step 5:

  Identify the part you need to replace. For instance, if you are replacing the screen, carefully disconnect the flex cables connected to the motherboard.

• Step 6:

  Remove any additional screws or components blocking access to the part you wish to replace. Note the position of each component to ensure correct reassembly.

• Step 7:

  Gently remove the defective part and replace it with the new one. Ensure all connectors are properly aligned and secured.

• Step 8:

  Reconnect the battery connector. Reassemble the device by replacing all screws and snapping the back cover into place.

• Step 9:

  Power on the Oukitel WP19 to test the new component and ensure it functions correctly.

Note: Always exercise caution when working on electronic devices. If you are not confident, it is recommended to seek professional help.