Oukitel WP20 spare parts

Oukitel WP20 Spare Parts (Repuestos) - Technical Characteristics

Display

• Size: 5.93 inches
• Resolution: 720 x 1440 pixels
• Type: IPS LCD capacitive touchscreen

Battery

• Capacity: 4000 mAh
• Type: Non-removable Li-Po battery

Camera

• Main Camera: 13 MP, f/2.2, PDAF
• Features: LED flash, HDR, panorama
• Video: 1080p@30fps
• Selfie Camera: 5 MP

Memory

• RAM: 4 GB
• Internal Storage: 32 GB
• Expandable Storage: microSDXC (uses shared SIM slot)

Processor

• Chipset: MediaTek MT6761 Helio A22 (12 nm)
• CPU: Quad-core 2.0 GHz Cortex-A53
• GPU: PowerVR GE8320

Instructions for Replacing Oukitel WP20 Spare Parts (Repuestos)

Replacing the Display

Required tools: Phillips screwdriver, plastic pry tool, suction cup, adhesive tape.

• 1. Power off your Oukitel WP20 and remove any SIM or SD card.
• 2. Use the Phillips screwdriver to remove the screws located at the bottom of the phone.
• 3. Use the suction cup to gently lift the display. Simultaneously, insert the plastic pry tool between the display and the phone frame to gently detach the display from the adhesive.
• 4. Once the display is lifted, carefully disconnect the display ribbon cable from the motherboard.
• 5. Attach the new display by connecting the ribbon cable to the motherboard.
• 6. Carefully align the new display with the phone frame and press it into place. Use adhesive tape if necessary to secure the display.
• 7. Reinsert and tighten the screws at the bottom of the phone.
• 8. Power on the phone to check the new display is functioning correctly.

Replacing the Battery

Required tools: Phillips screwdriver, plastic pry tool, adhesive tape.

• 1. Power off your Oukitel WP20 and remove any SIM or SD card.
• 2. Use the Phillips screwdriver to remove the screws securing the back cover.
• 3. Use the plastic pry tool to gently detach the back cover from the phone frame.
• 4. Locate the battery connector on the motherboard and gently disconnect it.
• 5. Carefully remove the adhesive tapes securing the old battery to the phone frame.
• 6. Remove the old battery and replace it with the new one.
• 7. Connect the new battery to the motherboard.
• 8. Reattach the back cover and secure it with the screws.
• 9. Power on the phone to check that the new battery is functioning correctly.

Replacing the Main Camera

Required tools: Phillips screwdriver, plastic pry tool.

• 1. Power off your Oukitel WP20 and remove any SIM or SD card.
• 2. Use the Phillips screwdriver to remove the screws securing the back cover.
• 3. Use the plastic pry tool to gently detach the back cover from the phone frame.
• 4. Locate the main camera module on the motherboard and gently disconnect it from the connector.
• 5. Carefully remove the old main camera module.
• 6. Install the new main camera module by connecting it to the motherboard connector.
• 7. Reattach the back cover and secure it with the screws.
• 8. Power on the phone and test the new camera to ensure proper functionality.