Oukitel WP21 spare parts

Technical Characteristics of Oukitel WP21 Repuestos

The Oukitel WP21 is a rugged smartphone designed for durability and resilience under extreme conditions. Below are some of the key technical characteristics of its spare parts (repuestos):

• Battery: 9800mAh, non-removable Li-Po battery ensuring long-lasting usage.
• Display: 6.78 inches IPS LCD, 1080 x 2400 pixels resolution.
• Processor: MediaTek Dimensity 700 Octa-core.
• RAM & Storage: 8GB RAM and 128GB internal storage, expandable via microSDXC.
• Camera: Triple camera setup with 64MP main sensor, ultra-wide and macro lenses.
• Operating System: Android 11.
• Waterproof and Dustproof: IP68/IP69K ratings ensuring protection from water and dust.

Instructions for Replacing Oukitel WP21 Repuestos

Replacing components of the Oukitel WP21 requires careful handling and specific tools. Below is a step-by-step guide to replacing some of the key components:

Tools Required

• Phillips head screwdriver
• Plastic prying tools
• Tweezers
• Suction cup
• Adhesive tape
• Heat gun (optional)

Replacing the Display

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a heat gun to soften the adhesive around the edges of the back cover.
• Step 3: Carefully use a plastic prying tool to lift the back cover from its edges. Do not force it open.
• Step 4: Disconnect the battery connector to avoid any short circuits during the repair process.
• Step 5: Locate the connectors for the display and disconnect them using tweezers or your fingers.
• Step 6: Remove the screws securing the old display and gently lift it using the suction cup.
• Step 7: Clean any adhesive residue from the frame and apply new adhesive tape.
• Step 8: Position the new display in place and reconnect its connectors.
• Step 9: Reconnect the battery connector, and carefully align and press down the back cover until it snaps into place.
• Step 10: Power on the device to ensure the new display is functioning correctly.

Replacing the Battery

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a heat gun to soften the adhesive around the edges of the back cover.
• Step 3: Carefully use a plastic prying tool to lift the back cover from its edges. Do not force it open.
• Step 4: Disconnect the battery connector using tweezers or your fingers.
• Step 5: Remove the adhesive strips securing the battery in place.
• Step 6: Gently lift the old battery from its compartment.
• Step 7: Position the new battery in place and secure it with new adhesive strips.
• Step 8: Reconnect the battery connector and carefully align and press down the back cover until it snaps into place.
• Step 9: Power on the device to ensure the new battery is functioning correctly.

Always ensure you work in a static-free environment and handle all components with care to avoid any damage.