Oukitel WP22 spare parts

Technical Characteristics of Oukitel WP22 Repuestos

The Oukitel WP22 is a rugged smartphone designed to withstand harsh environments. Here are some key technical characteristics of its main components:

Screen

• Size: 6.52 inches
• Resolution: 1600 x 720 pixels
• Type: IPS LCD
• Protection: Corning Gorilla Glass

Battery

• Capacity: 10000 mAh
• Type: Li-Po, non-removable
• Charging: Fast charging 18W

Camera

• Main camera: 48 MP, f/1.8, PDAF
• Secondary camera: 16 MP, ultra-wide
• Front camera: 8 MP, f/2.0

Other Specifications

• Processor: MediaTek Helio G95 (12 nm)
• RAM: 8 GB
• Storage: 128 GB, expandable via microSD
• Operating System: Android 11

Instructions for Replacing Oukitel WP22 Repuestos

Tools Needed

• Phillips head screwdriver
• Plastic pry tool
• Suction cup
• Spudger
• Tweezers
• Heat gun or hair dryer
• Adhesive strips

Step-by-Step Instructions

1. Turn Off the Device

Ensure the phone is completely powered off before starting the repair process.

2. Remove the Back Cover

• Use the Phillips head screwdriver to remove the screws securing the back cover.
• Apply heat around the edges of the back cover to soften the adhesive.
• Use the suction cup to lift the back cover gently.
• Insert the plastic pry tool in the gap and work your way around to release the cover.

3. Disconnect the Battery

• Locate the battery connector on the motherboard.
• Use the spudger to gently disconnect the battery connector.

4. Remove the Damaged Component

Screen Replacement

• Disconnect the display connector from the motherboard.
• Apply heat to soften the adhesive securing the screen.
• Use the plastic pry tool to carefully lift and remove the screen.

Battery Replacement

• Lift the battery using a plastic pry tool, ensuring not to puncture it.
• Remove the battery from the compartment.

Camera Replacement

• Disconnect the camera connector from the motherboard.
• Use tweezers to gently remove the camera module.

5. Install the New Component

Screen Installation

• Align the new screen with the frame and press it into place.
• Reconnect the display connector to the motherboard.

Battery Installation

• Place the new battery in the compartment.
• Reconnect the battery connector to the motherboard.

Camera Installation

• Place the new camera module in the slot.
• Reconnect the camera connector to the motherboard.

6. Reassemble the Device

After replacing the required components, follow these steps to reassemble the device:

• Reconnect the battery connector if it was disconnected.
• Replace the back cover and ensure it clicks into place.
• Screw the back cover screws tightly.

7. Test the Device

• Power on the device and check if the new components are functioning correctly.
• Verify the screen display, touch sensitivity, and other functionalities.

If the device works properly, you have successfully replaced the Oukitel WP22 repuestos.