Oukitel WP23 spare parts

Oukitel WP23 Technical Characteristics

The Oukitel WP23 is a rugged smartphone designed to withstand harsh environments. Below are its core specifications:

• Dimensions: 166.2 x 81.4 x 19.8 mm
• Weight: 320g
• Display: 5.7 inches, 720 x 1440 pixels, Gorilla Glass Protection
• Processor: MediaTek Helio P22
• RAM: 4GB
• Internal Storage: 64GB (expandable via MicroSD)
• Battery: 5000 mAh, non-removable
• Rear Camera: 13 MP (Primary) + 2 MP (Depth)
• Front Camera: 5 MP
• Operating System: Android 11
• SIM: Dual SIM (Nano-SIM, Dual stand-by)
• Waterproof Rating: IP68/IP69K
• Connectivity: Wi-Fi 802.11, Bluetooth 5.0, GPS

Instructions for Replacing Oukitel WP23 Repuestos

Follow these detailed steps to replace various components (repuestos) of the Oukitel WP23. Ensure you have the necessary tools before starting:

Tools Required:

• Phillips Screwdriver
• Plastic Pry Tools
• Suction Cup
• Spudger
• Tweezers
• Replacement Parts (e.g., battery, screen)

Step-by-Step Replacement Instructions:

1. Power off the Device

Ensure the device is completely powered off to avoid any short circuits.

2. Remove SIM Tray

Using a SIM ejector tool, remove the SIM tray from the side of the device.

3. Open the Back Cover

• Use the Phillips screwdriver to remove all screws from the back panel.
• Insert the plastic pry tool into the seam between the back cover and the frame.
• Carefully slide the tool around the edges to detach the clips holding the back cover.
• Lift the back cover gently, ensuring not to damage any connected ribbons.

4. Disconnect the Battery

• Locate the battery connector on the motherboard.
• Use the spudger to disconnect the battery connector clip carefully.

5. Remove the Battery

• Use the spudger or a pull tab to gently lift the battery out of its compartment. Be cautious to avoid puncturing the battery.
• If adhesive is holding the battery, apply a bit of isopropyl alcohol to soften the glue.

6. Replace the Battery

• Place the new battery in the compartment aligning it properly.
• Reconnect the battery connector to the motherboard.

7. Replace the Screen (if needed)

• Disconnect the display connectors from the motherboard.
• Use the suction cup to help remove the screen from the frame.
• Insert the plastic pry tool between the screen and frame, carefully detaching it.
• Install the new screen, reconnecting the display connectors appropriately.

8. Reassemble the Device

• Place the back cover onto the frame and press it firmly to reattach the clips.
• Reinsert and tighten all screws you previously removed.
• Insert the SIM tray back into its slot.

9. Power On the Device

Press the power button to turn on the device and verify that everything is working correctly.

Following these detailed steps will allow you to successfully replace parts in your Oukitel WP23. Always take necessary precautions to avoid damaging any components.