Oukitel WP26 Spare Parts

Technical Characteristics of Oukitel WP26 Repuestos

Display

Type: IPS LCD

Size: 6.3 inches

Resolution: 1080 x 2340 pixels

Battery

Type: Lithium-ion

Capacity: 5000 mAh

Camera

Main Camera: 16 MP + 8 MP + 2 MP triple camera setup

Front Camera: 8 MP

Processor

Core: Octa-core

Chipset: MediaTek Helio P60

Memory

RAM: 4 GB

Internal Storage: 64 GB

Instructions on How to Replace Oukitel WP26 Repuestos

Replacing the Battery

• Step 1: Power off the device completely.
• Step 2: Use a screwdriver to remove the screws at the bottom of the device.
• Step 3: Carefully use a plastic opening tool to pry open the back cover.
• Step 4: Once the back cover is removed, locate the battery.
• Step 5: Disconnect the battery connector from the motherboard carefully.
• Step 6: Remove the old battery and replace it with the new battery.
• Step 7: Reconnect the battery connector to the motherboard.
• Step 8: Place the back cover back and screw it back tightly.
• Step 9: Power on the device to check if the battery is working properly.

Replacing the Screen

• Step 1: Power off the device completely.
• Step 2: Use a screwdriver to remove the screws at the bottom of the device.
• Step 3: Carefully use a plastic opening tool to pry open the back cover.
• Step 4: Disconnect the battery connector from the motherboard to prevent any electrical damage.
• Step 5: Locate and unscrew all the screws securing the screen connectors.
• Step 6: Disconnect the screen connectors from the motherboard.
• Step 7: Use a heat gun to soften the adhesive around the screen edges.
• Step 8: Gently use a suction cup and a plastic opening tool to lift and remove the broken screen.
• Step 9: Place the new screen in position and connect the screen connectors to the motherboard.
• Step 10: Secure the new screen by screwing back the screws.
• Step 11: Reconnect the battery connector to the motherboard.
• Step 12: Place the back cover back and screw it into place.
• Step 13: Power on the device to check if the new screen is functioning properly.

Replacing the Camera Module

• Step 1: Power off the device completely.
• Step 2: Use a screwdriver to remove the screws at the bottom of the device.
• Step 3: Carefully use a plastic opening tool to pry open the back cover.
• Step 4: Disconnect the battery connector from the motherboard to avoid any electrical issues.
• Step 5: Locate the camera module on the motherboard.
• Step 6: Carefully disconnect the camera module connector from the motherboard.
• Step 7: Remove the old camera module and replace it with the new camera module.
• Step 8: Reconnect the camera module connector to the motherboard.
• Step 9: Reconnect the battery connector to the motherboard.
• Step 10: Place the back cover back and screw it into place.
• Step 11: Power on the device to ensure the new camera module is working correctly.