Oukitel WP30 Pro spare parts

Technical Characteristics of Oukitel WP30 Pro Repuestos

Oukitel WP30 Pro is known for its rugged design and robust functionality. Below are the main technical specifications:

• Display: 6.67 inches, 1080 x 2400 pixels resolution
• Processor: MediaTek Dimensity 900, Octa-core
• RAM: 8GB
• Storage: 128GB, expandable via microSDXC
• Battery: 8000mAh, non-removable
• Operating System: Android 12
• Main Camera: 48 MP, 8 MP, 2 MP Triple camera setup
• Front Camera: 16 MP
• Connectivity: 5G, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.2, GPS

Instructions on How to Replace Oukitel WP30 Pro Repuestos

Below are detailed instructions on how to replace various components of the Oukitel WP30 Pro:

Replacing the Display

• Step 1: Power off your device and remove any SD card or SIM card if applicable.
• Step 2: Use a heat gun or hair dryer to gently heat the edges of the display to loosen the adhesive.
• Step 3: Carefully use a suction cup and a plastic pry tool to lift the display away from the body of the phone. Work your way around the edges to avoid damaging the screen.
• Step 4: Once the display is loose, gently disconnect the display cable from the motherboard.
• Step 5: Attach the new display by connecting the display cable back to the motherboard.
• Step 6: Firmly press the new display back into place and ensure the adhesive is sealed properly. Re-insert any removed SD or SIM cards.
• Step 7: Power on the device to check if the display is functioning correctly.

Replacing the Battery

• Step 1: Power off your device and remove any SD card or SIM card if applicable.
• Step 2: Remove the back cover by using a plastic pry tool to carefully separate it from the body of the phone.
• Step 3: Unscrew any screws securing the battery connector shield and then disconnect the battery connector from the motherboard.
• Step 4: Use a plastic pry tool to carefully lift the battery from its recess. Be cautious of the adhesive strips holding the battery in place.
• Step 5: Place the new battery in position and reconnect the battery connector to the motherboard.
• Step 6: Secure the battery connector shield back with the screws.
• Step 7: Replace the back cover and ensure it snaps into place securely.
• Step 8: Power on the device to check if the new battery is functioning correctly.

Replacing the Camera Module

• Step 1: Power off your device and remove any SD card or SIM card if applicable.
• Step 2: Remove the back cover using a plastic pry tool to prevent any damage to the body of the phone.
• Step 3: Locate the camera module and unscrew any securing screws. Carefully disconnect the camera connector from the motherboard.
• Step 4: Remove the camera module from its housing and position the new camera module in place.
• Step 5: Reconnect the camera connector to the motherboard and secure any screws previously removed.
• Step 6: Replace the back cover and ensure it snaps into place securely.
• Step 7: Power on the device and test the camera to ensure it is functioning correctly.

Important Notes

• Always ensure that you work in a static-free environment to prevent damage to electronic components.
• Use the necessary tools and take your time, rushing may cause damage to delicate components.
• If unsure, seek professional help to avoid potential damage to your device.