Oukitel WP32 spare parts

Technical Characteristics of Oukitel WP32 Repuestos

The Oukitel WP32 is a rugged smartphone known for its durability and robust performance. Here are the technical characteristics of Oukitel WP32 repuestos (replacement parts):

1. Screen

• Size: 5.5 inches
• Resolution: 1440 x 720 pixels
• Type: IPS LCD

2. Battery

• Capacity: 4200 mAh
• Type: Non-removable Li-Po

3. Camera

• Primary: 13 MP
• Secondary: 5 MP

4. Processor

• Type: Quad-core 1.5 GHz Cortex-A53
• Chipset: MediaTek MT6737V

5. Memory

• Internal: 16 GB
• RAM: 2 GB
• Expandable: microSD up to 64 GB

Instructions on How to Replace Oukitel WP32 Repuestos

1. Tools Required

Gather the necessary tools for the replacement:

• Small Phillips screwdriver
• Plastic spudger
• Tweezers
• Nylon pry tool
• Suction cup tool
• Replacement parts (screen, battery, etc.)

2. Power Off the Device

Ensure that the Oukitel WP32 is powered off before you begin any repair work.

3. Open the Back Cover

Use the nylon pry tool to gently lift the back cover. Start from the bottom corner and work your way around. Be careful not to damage the clips holding the cover in place.

4. Remove the Battery

Use the screwdriver to remove the screws securing the battery connector. Carefully lift the connector with the spudger to disconnect it. Gently pry out the battery using the spudger.

5. Disconnect and Remove the Screen

Use the screwdriver to remove the screws securing the screen connector. Use the suction cup tool to lift the screen slightly, then gently insert the spudger to detach the adhesive around the edges. Carefully lift the screen and disconnect the flex cable using the tweezers.

6. Install the Replacement Screen

Connect the new screen by attaching the flex cable to the motherboard. Secure it with screws and gently press the screen into place, ensuring the adhesive bonds properly. Reattach any screws that were removed.

7. Install the Replacement Battery

Place the new battery into the compartment and connect the battery connector. Secure it with screws and ensure the connector is firmly attached.

8. Close the Back Cover

Align the back cover with the device and press firmly around the edges to snap it back into place. Ensure all clips are secured.

9. Power On the Device

Power on the Oukitel WP32 to verify that the replacement parts are functioning correctly.

10. Final Checks

Check the functionality of the new screen, battery, and any other replaced parts. Ensure there are no loose connections and the device operates as expected.