Oukitel WP8 Pro premium quality

Oukitel WP8 Pro Premium Quality Technical Characteristics

The Oukitel WP8 Pro is a rugged smartphone designed for durability and performance. Below are its key technical specifications:

Display

• Size: 6.49 inches
• Resolution: 720 x 1560 pixels
• Type: IPS LCD
• Protection: Corning Gorilla Glass

Performance

• Chipset: MediaTek Helio A25
• CPU: Octa-core (4x1.8 GHz Cortex-A53 & 4x1.5 GHz Cortex-A53)
• GPU: PowerVR GE8320
• RAM: 4GB
• Storage: 64GB
• Expandable Storage: Yes, microSD up to 256GB

Camera

• Rear Camera: Triple 16 MP (wide) + 2 MP (depth) + 2 MP (macro)
• Front Camera: 8 MP
• Features: LED flash, HDR, panorama
• Video: 1080p@30fps

Battery

• Capacity: 5000 mAh
• Type: Non-removable Li-Po

Other Features

• Operating System: Android 10
• Network: 4G LTE
• SIM: Dual SIM (Nano-SIM, dual stand-by)
• Housing: Rugged, IP68/IP69K dust/water resistant

Instructions to Replace Oukitel WP8 Pro Premium Quality

Replacing components or the entire unit of your Oukitel WP8 Pro requires careful attention to detail. Follow these comprehensive steps to ensure a smooth replacement.

Required Tools and Materials

• Plastic Pry Tools
• Tweezers
• Small Phillips Screwdriver
• SIM Ejector Tool
• Replacement Parts (as needed)

Step-by-Step Replacement Instructions

• Step 1: Power Off the Device

Ensure your phone is completely powered off before starting the disassembly process.

• Step 2: Remove SIM Tray

Use the SIM ejector tool to remove the SIM and SD card tray from the device.

• Step 3: Remove Back Cover

Insert a plastic pry tool between the back cover and the frame. Carefully work your way around the edges to release the clips holding the back cover in place.

• Step 4: Disconnect Battery

Using a Phillips screwdriver, remove the screws securing the battery connector cover. Use tweezers to gently lift and disconnect the battery connector.

• Step 5: Remove Internal Components

Unscrew and remove any screws holding down internal components such as the motherboard, cameras, and other modular parts. Use plastic pry tools to disconnect ribbon cables and other connectors carefully.

• Step 6: Replace Necessary Parts

Replace the defective or damaged part with the new replacement. Ensure all connectors and cables are securely attached to the new part.

• Step 7: Reassemble the Phone

Carefully reattach all components in reverse order. Reconnect all ribbon cables, secure the motherboard and other modules with screws, and reconnect the battery.

• Step 8: Reattach Back Cover

Place the back cover onto the phone and press around the edges to snap it back into place.

• Step 9: Insert SIM Tray

Reinsert the SIM and SD card tray into the device.

• Step 10: Power On the Device

Power on your Oukitel WP8 Pro to ensure the replacement was successful and that the device functions correctly.

Follow these detailed steps to ensure your Oukitel WP8 Pro is successfully replaced. If you encounter any issues, consider seeking professional assistance.