Own S4035 spare parts

Technical Characteristics of Own S4035 Repuestos

Screen

Size: 4.0 inches

Resolution: 480 x 800 pixels

Type: LCD capacitive touchscreen

Battery

Type: Li-Ion

Capacity: 1500 mAh

Camera

Primary: 5 MP

Secondary: 0.3 MP (VGA)

Memory

Internal: 4 GB

RAM: 512 MB

Expandable: microSD, up to 32 GB

Processor

Type: Dual-core

Frequency: 1.2 GHz

Instructions on How to Replace Own S4035 Repuestos

1. Preparation

• Gather all necessary tools: Small Phillips screwdriver, Plastic opening tools, Tweezers, and a small suction cup.
• Ensure that you are in an anti-static environment to prevent damage to the internal components.
• Power off the device and remove the SIM and SD cards if present.

2. Removing the Back Cover

• Using a plastic opening tool, carefully pry around the edges of the back cover to release the clips holding it in place.
• Once all clips are released, lift the back cover off and set it aside.

3. Disconnecting the Battery

• Locate the battery connector near the bottom of the device.
• Use the tweezers or plastic opening tool to gently disconnect the battery connector from the motherboard.
• Remove any adhesive strips securing the battery and then carefully lift the battery out of the device.

4. Removing the Screen

• Use the small Phillips screwdriver to remove all screws securing the midframe and set them aside.
• Once the screws are removed, use the plastic opening tool to gently pry the midframe away from the device.
• Employ the suction cup to lift the old screen from the front panel, starting from the edges to avoid damaging the LCD.
• Disconnect the screen flex cable from the motherboard using the plastic opening tool.

5. Installing the New Screen

• Connect the new screen's flex cable to the motherboard.
• Carefully align and press the new screen into the front panel, ensuring it sits flush and secure.

6. Reassembling the Device

• Reattach the midframe and secure it with the screws you previously removed.
• Reconnect the battery connector to the motherboard and place the battery back into its compartment.
• Place the back cover onto the device and press around the edges to secure the clips.
• Reinsert the SIM and SD cards if applicable.

7. Final Checks

• Power on the device to ensure the new screen and battery are functioning correctly.
• Test all functionalities to guarantee everything is working as expected.

By following these detailed instructions, you should be able to successfully replace the repuestos of the Own S4035.