Prestigio Multiphone Pap 3404 spare parts

Technical Characteristics of Prestigio Multiphone PAP 3404 Repuestos

The Prestigio Multiphone PAP 3404 is equipped with hardware and components that are essential for its function. The following are the key technical characteristics of the phone and its replacement parts (repuestos):

Key Specifications

• Screen: 4.0-inch TFT capacitive touchscreen, 800 x 480 pixels resolution
• Processor: Dual-core 1.0 GHz
• RAM: 512 MB
• Storage: 4 GB internal, expandable via microSD up to 32 GB
• Battery: Li-Ion 1500 mAh
• Camera: 2 MP rear camera
• Operating System: Android 4.2 Jelly Bean
• Connectivity: 3G, Wi-Fi 802.11 b/g/n, Bluetooth 4.0, GPS

Common Repuestos

• Screen/Digitizer Assembly
• Battery
• Back Cover
• Charging Port
• Camera Module
• Loudspeaker

Instructions for Replacing Prestigio Multiphone PAP 3404 Repuestos

Replacing the components of the Prestigio Multiphone PAP 3404 can be performed by following these detailed steps:

1. Replacing the Screen/Digitizer Assembly

• Power off the phone and remove the back cover and battery.
• Unscrew all screws securing the mid-frame using a small Phillips screwdriver.
• Gently pry the mid-frame off using a plastic opening tool.
• Disconnect the digitizer and LCD flex cables from the motherboard.
• Carefully separate the screen assembly from the body of the device using a heat gun or hair dryer to loosen the adhesive.
• Install the new screen assembly by aligning it correctly and connecting the flex cables back to the motherboard.
• Reassemble the phone by reversing the disassembly steps.

2. Replacing the Battery

• Power off the phone and remove the back cover.
• Remove the battery from its compartment by lifting it out.
• Place the new battery into the compartment, ensuring proper alignment.
• Reassemble the phone by putting the back cover on.

3. Replacing the Charging Port

• Power off the phone and remove the back cover and battery.
• Unscrew all screws securing the mid-frame and remove it using a plastic opening tool.
• Locate the charging port on the motherboard and desolder the broken port using a soldering iron.
• Solder the new charging port onto the motherboard.
• Reassemble the phone by reversing the disassembly steps.

4. Replacing the Camera Module

• Power off the phone and remove the back cover and battery.
• Unscrew all screws securing the mid-frame and remove it using a plastic opening tool.
• Locate the camera module on the motherboard and disconnect its flex cable.
• Remove the old camera module and replace it with the new one.
• Reconnect the flex cable and reassemble the phone by reversing the disassembly steps.

Always handle components with care and use appropriate tools when replacing phone parts. For complex repairs, consider seeking professional help.