Prestigio Multiphone Pap 5044 spare parts

Technical Characteristics of Prestigio Multiphone PAP 5044 Repuestos

The Prestigio Multiphone PAP 5044 is a mid-range smartphone designed for everyday use. Here are some key technical characteristics of its spare parts (repuestos):

• Display: 5.0 inches, 720 x 1280 pixels, IPS LCD capacitive touchscreen
• Processor: Quad-core 1.2 GHz Cortex-A7
• RAM: 1 GB
• Internal Storage: 4 GB (expandable via microSD up to 32 GB)
• Camera: 8 MP rear camera, 2 MP front camera
• Battery: Li-Ion 2000 mAh, user-replaceable
• Operating System: Android 4.2 (Jelly Bean)

Instructions on How to Replace Prestigio Multiphone PAP 5044 Repuestos

Required Tools

• Plastic opening tool
• Phillips screwdriver
• Tweezers

Step-by-Step Replacement Instructions

Step 1: Power Off the Device

Ensure the Prestigio Multiphone PAP 5044 is completely turned off before starting any repair. This is crucial to avoid any electrical accidents.

Step 2: Remove the Back Cover

Use the plastic opening tool to carefully pry off the back cover. Start from one corner and work your way around the edges of the device.

Step 3: Remove the Battery

With the back cover removed, take out the battery by lifting it from the bottom edge. Make sure to disconnect any connectors carefully.

Step 4: Unscrew the Screws

Use the Phillips screwdriver to remove all the screws securing the internal components. Keep the screws in a safe place as you will need them for reassembly.

Step 5: Disconnect the Ribbon Cables

Using tweezers, gently disconnect all the ribbon cables that connect the various internal components. Be cautious not to tear any cables.

Step 6: Remove the Damaged Component

Carefully identify the damaged component (e.g., display, camera, etc.) and remove it. Make sure to note its orientation and how it is connected to other components.

Step 7: Install the New Component

Place the new component in the same position as the old one. Reconnect all ribbon cables and ensure they are securely attached.

Step 8: Reassemble the Device

Replace all the screws you removed earlier and make sure they are tightened securely. Place the battery back in its compartment.

Step 9: Close the Back Cover

Snap the back cover onto the device and ensure it is securely in place.

Step 10: Power On the Device

Turn on the Prestigio Multiphone PAP 5044 to verify that the replacement component is functioning correctly.

Follow these detailed instructions to successfully replace any defective parts in your Prestigio Multiphone PAP 5044. Always proceed with caution to avoid damaging the device.