Prestigio Multiphone Pap 5300 spare parts

Technical Characteristics of Prestigio Multiphone PAP 5300 Spare Parts

The Prestigio Multiphone PAP 5300 is a versatile smartphone known for its robust features and ease of use. Here are the key technical characteristics of its spare parts:

• Display: 5.3 inches, TFT capacitive touchscreen, 540 x 960 pixels resolution
• Battery: Li-Ion 2100 mAh, removable
• Camera: 8 MP primary, LED flash; 2 MP front camera
• Processor: Quad-core 1.2 GHz Cortex-A7
• Memory: 4 GB internal storage, 1 GB RAM, microSD up to 32 GB
• Operating System: Android OS, v4.1 (Jelly Bean)

Instructions for Replacing Prestigio Multiphone PAP 5300 Spare Parts

Tools Required

• Small Phillips screwdriver
• Plastic opening tools
• Tweezers
• Suction cup (if replacing the screen)
• Adhesive tape
• Replacement parts (battery, screen, etc.)

General Precautions

• Make sure to power off the phone before starting any repairs.
• Work on a clean, flat, and static-free surface.
• Keep small screws and components organized.

Battery Replacement

• Power off the phone.
• Remove the back cover by gently prying it open with a plastic opening tool.
• Use your fingers or tweezers to disconnect the battery connector.
• Remove the old battery by gently lifting it out of the compartment.
• Insert the new battery into the compartment and reconnect the battery connector.
• Replace the back cover and power on the phone to ensure it works correctly.

Screen Replacement

• Power off the phone and remove the back cover.
• Remove the battery, SIM card, and microSD card.
• Use a Phillips screwdriver to remove all visible screws securing the rear casing.
• Gently pry open the rear casing using a plastic opening tool.
• Disconnect any connectors attached to the motherboard.
• Use a suction cup to lift the front screen away from the frame carefully.
• Remove any adhesive holding the screen in place.
• Attach the new screen by aligning it with the frame and pressing down firmly.
• Reconnect all connectors to the motherboard.
• Reassemble the rear casing, battery, SIM card, and microSD card.
• Power on the phone to ensure the new screen works properly.

Camera Replacement

• Power off the phone and remove the back cover.
• Remove the battery, SIM card, and microSD card.
• Use a Phillips screwdriver to remove screws securing the rear casing.
• Gently pry open the rear casing using a plastic opening tool.
• Locate the camera module on the motherboard.
• Disconnect the camera module from its connector.
• Remove the old camera module carefully.
• Insert the new camera module and reconnect it to the motherboard.
• Reassemble the rear casing, battery, SIM card, and microSD card.
• Power on the phone and test the new camera to ensure it functions correctly.