Prestigio Multiphone Pap 5500 spare parts

Technical Characteristics of Prestigio Multiphone PAP 5500 Repuestos

The Prestigio Multiphone PAP 5500 is a dynamic and reliable smartphone known for its robust build and efficient performance. Below are the technical characteristics of its replacement parts (repuestos):

• Display: 5.5 inches IPS LCD, 720 x 1280 pixels resolution
• Processor: Quad-core 1.2 GHz Cortex-A7
• RAM: 1 GB
• Storage: 4 GB internal, expandable via microSD up to 32 GB
• Battery: Removable Li-Ion 2100 mAh battery
• Camera: Rear: 8 MP, Front: 2 MP
• Operating System: Android OS, v4.2 (Jelly Bean)

Instructions for Replacing Prestigio Multiphone PAP 5500 Repuestos

Replacing components in the Prestigio Multiphone PAP 5500 requires careful attention to detail and a methodical approach. Below are the step-by-step instructions for replacing key components:

Battery Replacement

• Step 1: Power off the phone.
• Step 2: Remove the back cover of the phone by prying it off from any corner.
• Step 3: Locate and remove the battery by lifting it from the bottom edge.
• Step 4: Insert the new battery, ensuring the contacts align properly.
• Step 5: Replace the back cover by pressing it back into place until it snaps in securely.

Screen Replacement

• Step 1: Power off the phone and remove the back cover.
• Step 2: Remove the battery, SIM card, and SD card if inserted.
• Step 3: Unscrew all visible screws holding the back frame in place.
• Step 4: Using a plastic prying tool, carefully separate the back frame from the front assembly.
• Step 5: Disconnect the display connector from the motherboard.
• Step 6: Heat the edges of the screen with a heat gun or hair dryer to soften the adhesive.
• Step 7: Use a suction cup and prying tool to lift and remove the damaged screen.
• Step 8: Clean any remaining adhesive from the frame.
• Step 9: Apply new adhesive to the frame and place the new screen, ensuring it fits snugly.
• Step 10: Reconnect the display connector to the motherboard.
• Step 11: Reassemble the phone by following the disassembly steps in reverse order.

Camera Replacement

• Step 1: Power off the phone and remove the back cover.
• Step 2: Remove the battery, SIM card, and SD card if inserted.
• Step 3: Unscrew all visible screws holding the back frame in place.
• Step 4: Using a plastic prying tool, carefully separate the back frame from the front assembly.
• Step 5: Locate and disconnect the camera connector from the motherboard.
• Step 6: Carefully remove the old camera module.
• Step 7: Insert the new camera module and connect it to the motherboard.
• Step 8: Reassemble the phone by following the disassembly steps in reverse order.

By following these detailed instructions, you can confidently replace the necessary components of your Prestigio Multiphone PAP 5500. Ensure you handle all parts with care and use appropriate tools for the replacement process.