Prestigio Multiphone Pap 5507 spare parts

Prestigio Multiphone PAP 5507 Technical Characteristics

The Prestigio Multiphone PAP 5507 is a versatile smartphone known for its robust design and dependable performance. Here are the key technical specifications of this device:

Technical Specifications

• Display: 5.0 inches, 720 x 1280 pixels
• Processor: Quad-core 1.3 GHz Cortex-A7
• RAM: 1 GB
• Storage: 8 GB (expandable via microSD up to 32 GB)
• Camera: Rear 8 MP, Front 2 MP
• Battery: Li-Ion 2000 mAh, removable
• Operating System: Android 4.4 (KitKat)

Instructions for Replacing Prestigio Multiphone PAP 5507 Components

Replacing parts on a Prestigio Multiphone PAP 5507 requires careful attention to detail and the right tools. Follow the instructions below to replace essential components.

Tools Required

• Plastic opening tools
• Small Phillips screwdriver
• Tweezers
• Suction cup (for screen replacement)
• Spudger
• Replacement parts (screen, battery, etc.)

Replacing the Battery

• Step 1: Power off the device completely.
• Step 2: Use the plastic opening tool to carefully remove the back cover.
• Step 3: Locate the battery. Use the pull tab to gently lift and remove the battery.
• Step 4: Place the new battery in the compartment, ensuring correct alignment.
• Step 5: Reattach the back cover and power on the phone to verify the replacement.

Replacing the Screen

• Step 1: Power off the device and remove the back cover.
• Step 2: Use the small Phillips screwdriver to remove all screws securing the frame.
• Step 3: Use the plastic opening tool to gently pry apart the frame from the screen.
• Step 4: Disconnect the screen connectors using the spudger.
• Step 5: Attach the new screen by reconnecting the connectors and securing them properly.
• Step 6: Reassemble the frame, ensuring all screws are tightly fastened.
• Step 7: Reattach the back cover and power on the device to test the new screen.

Replacing the Camera

• Step 1: Power off the phone and remove the back cover.
• Step 2: Use the small Phillips screwdriver to remove screws securing the rear camera.
• Step 3: Use tweezers to gently disconnect the camera module's connector.
• Step 4: Carefully remove the old camera module.
• Step 5: Insert the new camera module, reconnect its connector and secure it with screws.
• Step 6: Reattach the back cover and power on the phone to verify the camera replacement.