Realme 10 Pro Plus 5G spare parts

    There are 8 products.

    Realme 10 Pro Plus 5G Repuestos - Technical Specifications

    The Realme 10 Pro Plus 5G utilizes a range of high-quality components to ensure a top-notch user experience. Here, we look at the primary components and their technical characteristics:

    • Display: Super AMOLED capacitive touchscreen, 16M colors. Size 6.4 inches, Resolution 1080 x 2400 p...

    Realme 10 Pro Plus 5G Repuestos - Technical Specifications

    The Realme 10 Pro Plus 5G utilizes a range of high-quality components to ensure a top-notch user experience. Here, we look at the primary components and their technical characteristics:

    • Display: Super AMOLED capacitive touchscreen, 16M colors. Size 6.4 inches, Resolution 1080 x 2400 pixels.
    • Processor: Qualcomm SM7225 Snapdragon 750G 5G (8 nm).
    • Memory: Internal 128GB 6GB RAM, 128GB 8GB RAM, UFS 2.1; Expandable memory via MicroSD card.
    • Battery: Non-removable Li-Po 4500 mAh battery; Fast charging 50W, 100% in 47 min (advertised).
    • Camera Lenses: Four rear-mounted cameras, 108.0 MP + 8.0 MP + 2.0 MP + 2.0 MP; A single front-facing camera, 16.0 MP.

    Replacing Realme 10 Pro Plus 5G Repuestos

    Before you begin, ensure you have the necessary tools on hand, including a plastic opening tool, a heat gun or hairdryer, and a set of small precision screwdrivers.

    Step 1: Powering Off the Device

    Start by turning off the device. Hold down the power button and follow the prompts to power off.

    Step 2: Removing the Back Cover

    Apply the heat gun or hairdryer around the edges of the back cover to soften the adhesive. Once warm, use the plastic opening tool to gently pry the back cover from the device. Start at a corner for easier access.

    Step 3: Disconnecting the Battery

    Locate the battery connector on the exposed circuit board. Carefully unplug the connector to prevent any electrical discharge.

    Step 4: Replacing the Part

    Access the desired repuesto and remove the relevant screws using the precision screwdriver. Be cautious not to misplace these screws as they may be small. Gently disconnect any connectors and remove the current part. Replace with the new repuesto and reattach any connectors.

    Step 5: Reassembly

    First, reconnect the battery and then reattach the back cover. Ensure the cover is securely in place, applying gentle pressure around the edges. Power on your device and ensure the replaced part is functioning correctly.

    Note: Always seek professional help if unsure about any steps in the replacement process.

    Less
    More
    Showing 1 - 8 of 8 items