Realme 10 Pro Spare Parts

Realme 10 Pro Repuestos Technical Specifications

The Realme 10 Pro Repuestos is packed with excellent features and components. Below we outline some of the key specifications:

• Display: 6.6 inch, Super AMOLED, Full HD+, 120Hz refresh rate
• Processor: Octa-core, up to 2.4 GHz, Qualcomm Snapdragon 720G
• Memory: RAM 8GB, internal storage 128GB (expandable via microSD card)
• Battery: 5000mAh, supports 65W SuperDart Charge
• Camera: Quad Rear Camera- 108MP primary lens, 8MP ultra wide lens, 2MP macro lens, 2MP depth sensor; Front Camera- 16MP

Instructions on Replacing Realme 10 Pro Repuestos

Before you start, ensure that you have the necessary tools- screwdriver kit, spudger, tweezers, and heat gun or hair dryer. Don’t forget to turn off your phone before starting the procedure.

Step 1: Remove the Back Cover

Start with using the heat gun to soften the adhesive on the edges of the back cover. Use a suction cup and a plastic opening tool to pry open the back cover. Be careful not to damage any internal components.

Step 2: Disconnect the Battery

After removing the rear cover, you will see a metal plate protecting the battery connector. Remove the screws fixing the metal plate with a screwdriver and disconnect the battery connector.

Step 3: Remove the Circuit Board

Locate and unscrew the screws connecting the circuit board. Unplug all cables connected to it and gently remove the circuit board.

Step 4: Replace the Damaged Component

With the circuit board removed, replace the damaged component with the new Realme 10 Pro Repuesto part.

Step 5: Reassemble the Phone

After replacing the damaged part, reconnect all the cables to the circuit board and screw it back into place. Connect the battery, screw the protective metal plate back on, and snap the back cover into place.

Please note that these instructions are general steps and might differ slightly based on the specific Repuesto part you are replacing. Be patient and careful while performing each step.