Realme 12 Pro 5G spare parts

    There are 17 products.

    Technical Characteristics of Realme 12 Pro 5G Repuestos

    The Realme 12 Pro 5G Repuestos comprises of several tech-savvy hardware components that operate together to give an exceptional user experience. Here are some of the integral parts:

    • Display: Super AMOLED, 1080 x 2400 pixels, and a 90Hz refresh rate with a special protective screen replacem...

    Technical Characteristics of Realme 12 Pro 5G Repuestos

    The Realme 12 Pro 5G Repuestos comprises of several tech-savvy hardware components that operate together to give an exceptional user experience. Here are some of the integral parts:

    • Display: Super AMOLED, 1080 x 2400 pixels, and a 90Hz refresh rate with a special protective screen replacement part.
    • Processor: Qualcomm SM8250 Snapdragon 865 5G Octa-core with the corresponding piece available for replacement.
    • Memory: 8GB RAM, 128/256GB storage with the potential for memory chip replacement.
    • Camera: 64MP + 8MP + 2MP + 2MP Rear Camera and 32MP Front Camera, with replacement lenses and modules.
    • Battery: 4500mAh with Fast charging 65W technology. Battery repuesto is obtainable for replacement.

    Instructions for Replacing Realme 12 Pro 5G Repuestos

    Replacing Realme 12 Pro 5G Repuestos requires careful attention due to the intricate design of the smartphone. Kindly follow these steps for a successful operation:

    Required Tools

    • Star Screwdriver
    • Spudger
    • Tweezers
    • Plectrum or plastic opening tool
    • Heat gun or hairdryer

    Steps to Replace Realme 12 Pro 5G Repuestos

    Please operate in a static-free environment to prevent any electrostatic interaction with the device.

    1. Turn off your device completely and remove the SIM Tray.
    2. Using a heat gun or hairdryer, apply gentle heat around the edges of the back cover to soften the adhesive holding it in place.
    3. Carefully insert a plastic opening tool or a plectrum into the gap created. Gently move the tool around the edges to completely unclip the back cover from the phone.
    4. Unscrew all visible screws with the Star Screwdriver.
    5. With the use of a spudger, gently unclip the battery connector from the motherboard.
    6. Use the tweezers to disconnect and remove the other components as required. Be careful not to exert undue pressure on the motherboard or any other delicate parts of the phone.

    Note: The replacement of components should be done with exact matching parts, mismatched or incompatible parts can cause damage to the device.

    Assembling the Phone

    After the necessary replacements, reassemble the phone by following the disassembling instructions in reverse order.

    Remember to first connect the motherboard and the battery before finally snapping the back cover securely onto the phone. Be sure to check that the device is functioning properly after reassembly. Less
    More
    Showing 1 - 17 of 17 items