Realme 12 Pro Plus 5G spare parts

Technical Specifications of Realme 12 Pro Plus 5G Repuestos

The Realme 12 Pro Plus 5G repuestos are essential parts used for repair and maintenance of the Realme 12 Pro Plus 5G smartphone. Here are some of the main features:

• Display Screen: Amoled touchscreen panel with 1080 x 2400 pixels.
• Battery: Li-Po 4500 mAh, non-removable.
• Front Camera: Dual 16 MP, f/2.1, wide plus a 2 MP, f/2.4, depth module.
• Back Camera: Quad-camera set-up including a 108 MP, (primary), 8 MP, (ultra-wide), 2 MP, (macro) and 2 MP, (depth).
• MotherBoard: Powered by Octa-core processors and Qualcomm Snapdragon 888 system on a chip.

Instructions for Replacing Realme 12 Pro Plus 5G Repuestos

Tools Required:

• Screwdrivers
• Spudger Tool
• Tweezers

Procedure:

Before starting, make sure your device is powered off and you have discharged any static electricity from your body.

• Remove the Screws: Using the screwdriver, remove the screws around the device carefully. Store them in a small container to avoid losing them.
• Open the Case: Use your spudger tool to gently pry open the case. Start from one edge and work your way around the phone.
• Disconnect the Battery: Disconnect the battery from the motherboard using the tweezers.
• Remove the Old Parts: Using your tweezers, carefully remove the defective part that requires replacement.
• Install New Parts: Replace with the new Realme 12 Pro Plus 5G repuestos and reconnect them to the motherboard.
• Reassemble the Phone: Reconnect the battery, put the case back on, and reinsert the screws.

Note: This is a high-level overview. Different repuestos might require slightly different procedures. Always refer to detailed instructions when dealing with individual components.