Realme 6 Pro spare parts

Technical Characteristics of Realme 6 Pro Repuestos

The Realme 6 Pro is a high-quality smartphone that offers a range of features. If a part of your Realme 6 Pro is damaged or not working properly, it can often be repaired or replaced with spare parts, called repuestos in Spanish. Here are some technical characteristics of key Realme 6 Pro repuestos:

• Display: The Realme 6 Pro has a 6.6 inch IPS LCD capacitive touchscreen, with a display resolution of 1080 x 2400 pixels.
• Battery: A non-removable Li-Po 4300 mAh battery powers the Realme 6 Pro.
• Camera: The rear camera setup comprises of a 64MP wide lens, a 12MP telephoto lens, an 8MP ultrawide lens, and a 2MP macro lens. The front camera setup includes a 16MP wide lens and an 8MP ultrawide lens.
• Processor: The Realme 6 Pro operates on a Qualcomm SM7125 Snapdragon 720G chipset with a Octa-core processor.

Instructions on How to Replace Realme 6 Pro Repuestos

Please follow the instructions below to replace parts on the Realme 6 Pro. Always ensure that you have the correct replacement parts and necessary tools before starting.

Replacing the Display

• Power off your Realme 6 Pro and remove the SIM card tray.
• Use a heat gun or heating pad to soften the adhesive that binds the back cover to the phone frame.
• Once the adhesive is softened, carefully pry open the back cover using a thin plastic card or similar object.
• Remove all screws securing the protective plate to uncover the battery connector. Disconnect the battery.
• Disconnect the display connector and remove any remaining screws from the display assembly.
• Remove the old display and replace it with the new one, reversing the steps above to reassemble the phone.

Replacing the Battery

• Follow the same steps as above to remove the back cover and protective plate.
• Disconnect the battery connector and carefully pry out the battery using a plastic spudger or similar tool.
• Replace with the new battery and reverse the steps to reassemble.

Replacing the Camera

• To replace the camera, follow the same steps as above to open the phone and disconnect the battery.
• Next, disconnect the relevant camera connectors and carefully remove the camera module you wish to replace.
• Insert the new camera module and connect it to the motherboard. Reassemble the phone by reversing the above steps.

Please note that if you are not familiar with smartphone repair, it is highly recommended to take your Realme 6 Pro to a professional to avoid further damage.