Realme 7 Pro spare parts

Realme 7 Pro Repuestos Technical Characteristics

The Realme 7 Pro smartphone has several key components that function together to give it its capabilities. They include:

• Display: Super AMOLED, 1080 x 2400 pixels, 6.4 inches
• Processor: Qualcomm SM7125 Snapdragon 720G (8 nm)
• RAM: 6GB/8GB
• Camera: 64MP + 8MP + 2MP + 2MP rear, 32MP front
• Battery: Non-removable Li-Po 4500 mAh battery
• Storage: 128GB expandable via microSD slot

How to Replace Realme 7 Pro Repuestos

Instructions

These simple steps can guide you through the process of replacing parts on the Realme 7 Pro. Wear anti-static gloves to avoid any harm to the phone's parts.

Preparation

• Power off your Realme 7 Pro.
• Remove the SIM tray.
• Prepare all necessary tools.
• It is recommended to heat the edges of the back cover with a heat gun or hairdryer for ease of removal.

Removing the Back Cover

• Use a suction tool to create a gap between the cover and the body of the phone.
• Gently insert a plastic card or pry tool in the gap and slide it around the edges to break the adhesion.
• Lift the back cover away slowly to avoid damaging connecting cables.

Replacing the Component

• Identify the faulty component that needs replacement.
• Unscrew and remove the protective plate covering the component.
• Detach the connector of the faulty component.
• Remove the faulty component and replace it with the new one.
• Re-connect the connector and screw the protective plate back on.

Reassembling the Phone

• Realign the back cover with the body of the phone, ensuring all cables are in place.
• Apply pressure around the edges to re-adhere the cover.
• Reinsert the SIM tray.
• Power on the phone to confirm the new component is working as expected.

Note: This guidance is for informational purposes only. Replacement of phone components should ideally be done by a trained professional to avoid any potential damage to the device.