Realme 7I spare parts

Realme 7I Repuestos: Technical Specifications

The Realme 7I Repuestos are the individual components and parts that make up the Realme 7I smartphone. They include parts such as the display, battery, camera modules, casing, and internal hardware components.

Display

• Size: 6.5 inches, 102.0 cm2
• Resolution: 720 x 1600 pixels, 20:9 ratio

Battery

• Capacity: 5000 mAh, non-removable
• Type: Li-Po

Camera

• Main Camera: 48 MP, f/1.8, (wide), 1/2.0", 0.8µm, PDAF
• Features: LED flash, HDR, panorama

Instructions on How to Replace Realme 7I Repuestos

This guide will walk you through replacing the most commonly replaced parts on the Realeme 7I.

Before You Begin:

• Make sure the device is turned off and disconnected from any power source.
• Get a professional toolkit for smartphone repair.
• Remember that unauthorized repairs may void any existing warranties.
• Proceed with caution to avoid personal injury or further device damage.

Replacing the Battery:

The battery is one of the most frequently replaced components in any smartphone. Here is how you can replace it on a Realme 7I smartphone.

• Using a professional pry tool, carefully remove the back cover of the phone. Start from the bottom and work your way up around the edges.
• Exposing the inside, you’ll find the battery. Disconnect it from the motherboard.
• After that, use a professional sucking disc to suck up the battery for removal.
• Once the battery is removed, replace it with a new one and assemble the phone in reverse order.

Replacing the Display:

The display is another commonly replaced component. Follow these steps to replace the display panel.

• Once you've removed the back cover and disconnected the battery, locate the display connector on the motherboard and disconnect it.
• Next, heat the front of the device to loosen the adhesive holding the display. Do this with a professional heat gun.
• Once the adhesive is loosened, use a professional screen opening tool to pry the display off. Start from the corners and move gently around the edges.
• When the display is removed, replace it with a new one. Apply new adhesive, connect the display to the motherboard, and reassemble the phone in reverse order.

Note: If you are not confident in doing these steps by yourself, it is advised to bring your phone to a professional technician instead to avoid further damages.