Realme 8 5G Spare parts

Realme 8 5G Spare Parts Specifications

The Realme 8 5G is a powerful smartphone equipped with several high-end features. Here are the specifications of its crucial spare parts:

• Display: IPS LCD, 90Hz, 600 nits (peak)
• Size: 6.5 inches, 102.0 cm2
• Resolution: 1080 x 2400 pixels, 20:9 ratio (~405 ppi density)
• OS: Android 11, realme UI 2.0
• Processor: MediaTek MT6833 Dimensity 700 5G (7 nm)
• Battery: Li-Po 5000 mAh, non-removable, support for 18W fast charging

Steps for Replacing Realme 8 5G Spare Parts

Before starting, remember that opening your device can nullify the warranty. Proceed with caution and only if you are confident in your ability to perform the following steps:

1. Switch off the phone

Before any repairs, ensure the phone is entirely powered down to avoid any short circuit.

2. Remove the SIM Tray

Use the SIM card ejector tool to carefully remove the SIM tray from the phone.

3. Remove the back Cover

Use a suction cup and a plastic card to carefully separate the back cover from the phone frame.

4. Disconnect the Battery

Remove the screws holding down the metal plate over the connectors and then disconnect the battery connector with a plastic spudger tool.

5. Replace needed Spare Parts

Identify the part that needs replacing (screen, battery, camera, etc.), and unscrew or unlink it from its connectors. Replace it with the new part and ensure it's securely connected.

6. Reassemble the Phone

Reconnect the battery and point the metal plate over the connectors. After that, reconnect the back cover to the phone frame and then, put the SIM tray back into its slot.

7. Switch On the Phone

With everything securely in place, turn the device back on to ensure it's working correctly after the repair.